Part Details for LT1101ACN8#PBF by Linear Technology
Results Overview of LT1101ACN8#PBF by Linear Technology
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LT1101ACN8#PBF Information
LT1101ACN8#PBF by Linear Technology is an Instrumentation Amplifier.
Instrumentation Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for LT1101ACN8#PBF
LT1101ACN8#PBF CAD Models
LT1101ACN8#PBF Part Data Attributes
|
|
LT1101ACN8#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1101ACN8#PBF
Linear Technology
LT1101 - Precision, Micropower, Single Supply Instrumentation Amplifier (Fixed Gain = 10 or 100); Package: PDIP; Pins: 8; Temperature Range: 0°C to 70°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | DIP | |
| Package Description | 0.300 INCH, PLASTIC, DIP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | N | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | INSTRUMENTATION AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.009 µA | |
| Bandwidth (3dB)-Nom | 0.037 MHz | |
| Common-mode Reject Ratio-Min | 98 dB | |
| Input Offset Current-Max (IIO) | 0.0007 µA | |
| Input Offset Voltage-Max | 250 µV | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -22 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Non-linearity-Max | 0.0075% | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 3.937 mm | |
| Slew Rate-Nom | 0.1 V/us | |
| Supply Current-Max | 0.148 mA | |
| Supply Voltage Limit-Max | 22 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Gain-Max | 100 | |
| Voltage Gain-Min | 10 | |
| Width | 7.62 mm |
Alternate Parts for LT1101ACN8#PBF
This table gives cross-reference parts and alternative options found for LT1101ACN8#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1101ACN8#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1101AIN8#PBF | Analog Devices Inc | $10.0596 | Precision, Micropower, Single Supply Instrumentation Amplifier (Fixed Gain = 10 or 100) | LT1101ACN8#PBF vs LT1101AIN8#PBF |
| LT1101ACN8#PBF | Analog Devices Inc | $13.8784 | Precision, Micropower, Single Supply Instrumentation Amplifier (Fixed Gain = 10 or 100) | LT1101ACN8#PBF vs LT1101ACN8#PBF |
LT1101ACN8#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LT1101ACN8 involves keeping the input and output traces short and wide, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a separate analog ground plane and to keep digital signals away from the analog section.
-
To ensure stability, make sure to follow the recommended component values and layout guidelines in the datasheet. Additionally, ensure that the output capacitor has a low ESR and is properly sized for the output current. It's also important to check for oscillations and ringing on the output voltage and adjust the compensation components as needed.
-
The LT1101ACN8 has an operating temperature range of -40°C to 85°C. However, the device can be operated at temperatures above 85°C with derating, but this may affect its reliability and lifespan.
-
The LT1101ACN8 is a commercial-grade device and may not meet the requirements for high-reliability or aerospace applications. For such applications, it's recommended to use a device that is specifically designed and qualified for those environments, such as the LT1101H or LT1101M.
-
To troubleshoot issues with the LT1101ACN8, start by checking the input voltage, output voltage, and output current. Use an oscilloscope to check for oscillations, ringing, or other anomalies on the output voltage. Also, check the device's thermal performance and ensure that it's not overheating. If the issue persists, consult the datasheet and application notes for guidance or contact Linear Technology's support team.