Part Details for LT1077S8#PBF by Linear Technology
Results Overview of LT1077S8#PBF by Linear Technology
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Education and Research
Internet of Things (IoT)
Audio and Video Systems
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Entertainment and Gaming
Automotive
LT1077S8#PBF Information
LT1077S8#PBF by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1077S8#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | IC,OP-AMP,SINGLE,BIPOLAR,SOP,8PIN,PLASTIC, LEAD FREE | 32 |
|
$5.1000 / $10.2000 | Buy Now |
Part Details for LT1077S8#PBF
LT1077S8#PBF CAD Models
LT1077S8#PBF Part Data Attributes
|
|
LT1077S8#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1077S8#PBF
Linear Technology
LT1077 - Micropower, Single Supply, Precision Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, PLASTIC, SO-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | S8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.012 µA | |
| Bias Current-Max (IIB) @25C | 0.011 µA | |
| Common-mode Reject Ratio-Min | 94 dB | |
| Common-mode Reject Ratio-Nom | 107 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 450 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -22 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Slew Rate-Min | 0.05 V/us | |
| Slew Rate-Nom | 0.12 V/us | |
| Supply Current-Max | 0.095 mA | |
| Supply Voltage Limit-Max | 22 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 250 | |
| Voltage Gain-Min | 200000 | |
| Width | 3.9 mm |
Alternate Parts for LT1077S8#PBF
This table gives cross-reference parts and alternative options found for LT1077S8#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1077S8#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| OPA251UA | Texas Instruments | $2.1634 | Single, 15V single-supply, micro power operational amplifiers 8-SOIC -40 to 85 | LT1077S8#PBF vs OPA251UA |
| LT1077S8#PBF | Analog Devices Inc | $4.3622 | Micropower, Single Supply, Precision Op Amp | LT1077S8#PBF vs LT1077S8#PBF |
| LT1077S8 | Linear Technology | Check for Price | LT1077 - Micropower, Single Supply, Precision Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C | LT1077S8#PBF vs LT1077S8 |
| MAX480CSA-T | Maxim Integrated Products | Check for Price | Operational Amplifier, 1 Func, 220uV Offset-Max, BIPolar, PDSO8, 0.150 INCH, MS-012A, SOIC-8 | LT1077S8#PBF vs MAX480CSA-T |
| MAX480CSA+T | Maxim Integrated Products | Check for Price | Operational Amplifier, 1 Func, 70uV Offset-Max, BIPolar, PDSO8, 0.150 INCH, MS-012, SOIC-8 | LT1077S8#PBF vs MAX480CSA+T |
| LT1077S8#TR | Analog Devices Inc | Check for Price | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDSO8 | LT1077S8#PBF vs LT1077S8#TR |
| OPA251UA/2K5 | Burr-Brown Corp | Check for Price | Operational Amplifier, 1 Func, 300uV Offset-Max, PDSO8, GREEN, PLASTIC, MS-012AA, SOIC-8 | LT1077S8#PBF vs OPA251UA/2K5 |
| MAX480ESA-T | Maxim Integrated Products | Check for Price | Operational Amplifier, 1 Func, 250uV Offset-Max, BIPolar, PDSO8, 0.150 INCH, MS-012A, SOIC-8 | LT1077S8#PBF vs MAX480ESA-T |
| LT1077IS8 | Linear Technology | Check for Price | LT1077 - Micropower, Single Supply, Precision Op Amp; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C | LT1077S8#PBF vs LT1077IS8 |
| LT1077S8 | Analog Devices Inc | Check for Price | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDSO8 | LT1077S8#PBF vs LT1077S8 |
LT1077S8#PBF Frequently Asked Questions (FAQ)
-
The maximum input voltage that the LT1077S8#PBF can handle is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
-
To ensure the stability of the output voltage, make sure to follow the recommended layout and component placement guidelines, use a sufficient output capacitor, and avoid overloading the regulator.
-
The minimum input voltage required for the LT1077S8#PBF to function properly is 3.5V, but it's recommended to keep it above 4V for optimal performance.
-
Yes, the LT1077S8#PBF can operate in high-temperature environments up to 125°C, but the output current may need to be derated to prevent overheating.
-
To protect the LT1077S8#PBF from input voltage transients, use a TVS diode or a transient voltage suppressor in parallel with the input capacitor to clamp the voltage and prevent damage.