-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LMX2487ESQ/NOPB by Texas Instruments
Results Overview of LMX2487ESQ/NOPB by Texas Instruments
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LMX2487ESQ/NOPB Information
LMX2487ESQ/NOPB by Texas Instruments is a PLL or Frequency Synthesis Circuit.
PLL or Frequency Synthesis Circuits are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for LMX2487ESQ/NOPB
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LMX2487ESQ/NOPBCT-ND
|
DigiKey | IC PLL FREQ SYNTH 24WQFN Min Qty: 1 Lead time: 18 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) | Temporarily Out of Stock |
|
$2.3693 / $4.3400 | Buy Now |
|
DISTI #
926-LMX2487ESQ/NOPB
|
Mouser Electronics | Phase Locked Loops - PLL 3-GHz to 7.5-GHz del ta-sigma low power d A 926-LMX2487ESQE/NOPB RoHS: Compliant | 0 |
|
$2.3600 / $4.3400 | Order Now |
|
DISTI #
86280048
|
Verical | Clock Generator 5MHz to 7.5GHz-IN 7500MHz-OUT 24-Pin WQFN EP T/R RoHS: Compliant Min Qty: 137 Package Multiple: 1 Date Code: 1301 | Americas - 9977 |
|
$2.3000 / $2.7375 | Buy Now |
|
|
Quest Components | 7996 |
|
$4.5810 / $9.1620 | Buy Now | |
|
|
Rochester Electronics | LMX2487E Delta-Sigma Low Power Dual PLL for RF Personal Communications RoHS: Compliant Status: Active Min Qty: 1 | 9977 |
|
$1.8400 / $2.3000 | Buy Now |
Part Details for LMX2487ESQ/NOPB
LMX2487ESQ/NOPB CAD Models
LMX2487ESQ/NOPB Part Data Attributes
|
|
LMX2487ESQ/NOPB
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
LMX2487ESQ/NOPB
Texas Instruments
3-GHz to 7.5-GHz delta-sigma low power dual PLL for RF personal communications 24-WQFN -40 to 85
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | QFN | |
| Package Description | LLP-24 | |
| Pin Count | 24 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 5A991.G | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Additional Feature | QUADRUPLE MODULUS PRESCALER (RF):16/17/20/21 OR 32/33/36/37 | |
| Analog IC - Other Type | PLL FREQUENCY SYNTHESIZER | |
| JESD-30 Code | S-PQCC-N24 | |
| JESD-609 Code | e3 | |
| Length | 4 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 1 | |
| Number of Terminals | 24 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Frequency-Max | 7500 MHz | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC24,.16SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.8 mm | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.5 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 4 mm |
Alternate Parts for LMX2487ESQ/NOPB
This table gives cross-reference parts and alternative options found for LMX2487ESQ/NOPB. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LMX2487ESQ/NOPB, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LMX2487ESQ/NOPB | National Semiconductor Corporation | Check for Price | IC PLL FREQUENCY SYNTHESIZER, 7500 MHz, PQCC24, 4 X 4 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, LLP-24, PLL or Frequency Synthesis Circuit | LMX2487ESQ/NOPB vs LMX2487ESQ/NOPB |
| LMX2487ESQ | National Semiconductor Corporation | Check for Price | IC PLL FREQUENCY SYNTHESIZER, 7500 MHz, PQCC24, 4 X 4 MM, 0.80 MM HEIGHT, LLP-24, PLL or Frequency Synthesis Circuit | LMX2487ESQ/NOPB vs LMX2487ESQ |
LMX2487ESQ/NOPB Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a low-ESR capacitor for the VCC pin and a 10uF capacitor for the AVCC pin.
-
Ensure that the VCC pin is powered up before the AVCC pin. The VCC pin should be powered up first, followed by the AVCC pin. The device is fully operational after the power-up sequence is complete and the internal clock is stable.
-
A high-quality, low-jitter clock source is recommended. The device can use an external clock source or an internal oscillator. For optimal performance, use a clock source with a jitter of less than 100 ps.
-
Use the power-down mode to reduce power consumption when the device is not in use. Disable the internal oscillator and use an external clock source when possible. Optimize the clock frequency and voltage regulator settings for the specific application.
-
Use a heat sink or thermal pad to dissipate heat. Ensure good airflow around the device and avoid blocking airflow. Use a thermal interface material with a thermal conductivity of at least 1 W/m-K.