Part Details for LM2825N-5.0 by National Semiconductor Corporation
Results Overview of LM2825N-5.0 by National Semiconductor Corporation
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM2825N-5.0 Information
LM2825N-5.0 by National Semiconductor Corporation is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LM2825N-5.0
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1 |
|
RFQ |
Part Details for LM2825N-5.0
LM2825N-5.0 CAD Models
LM2825N-5.0 Part Data Attributes
|
|
LM2825N-5.0
National Semiconductor Corporation
Buy Now
Datasheet
|
Compare Parts:
LM2825N-5.0
National Semiconductor Corporation
IC 1.2 A SWITCHING REGULATOR, 150 kHz SWITCHING FREQ-MAX, PDIP24, 1.250 X 0.540 INCH, 0.260 INCH HEIGHT, PLASTIC, DIP-24, Switching Regulator or Controller
|
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | NATIONAL SEMICONDUCTOR CORP | |
| Package Description | 1.250 X 0.540 INCH, 0.260 INCH HEIGHT, PLASTIC, DIP-24 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | VOLTAGE-MODE | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 40 V | |
| Input Voltage-Min | 7 V | |
| JESD-30 Code | R-PDIP-T24 | |
| JESD-609 Code | e0 | |
| Length | 31.75 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 24 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 1.2 A | |
| Output Voltage-Nom | 5 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP24,.6 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 7.24 mm | |
| Supply Current-Max (Isup) | 10 mA | |
| Surface Mount | NO | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 150 kHz | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 40 | |
| Width | 15.24 mm |
Alternate Parts for LM2825N-5.0
This table gives cross-reference parts and alternative options found for LM2825N-5.0. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LM2825N-5.0, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LM2825N-5.0 | Texas Instruments | Check for Price | 2.4A SWITCHING REGULATOR, 150kHz SWITCHING FREQ-MAX, PDIP24, 1.250 X 0.540 INCH, 0.260 INCH HEIGHT, PLASTIC, DIP-24 | LM2825N-5.0 vs LM2825N-5.0 |
| LM2825N-5.0/NOPB | Texas Instruments | Check for Price | Integrated Power Supply 1A DC-DC Converter 24-PDIP -40 to 125 | LM2825N-5.0 vs LM2825N-5.0/NOPB |
LM2825N-5.0 Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the LM2825N-5.0 is 12V, although it's recommended to keep it below 10V for reliable operation.
-
Yes, the LM2825N-5.0 can be used as a voltage regulator for a microcontroller, but it's essential to ensure that the output current requirement of the microcontroller does not exceed the maximum output current of the LM2825N-5.0, which is 500mA.
-
The output voltage of the LM2825N-5.0 is fixed at 5.0V and does not require any external resistors or capacitors to set the output voltage.
-
The dropout voltage of the LM2825N-5.0 is typically around 1.5V to 2.0V, which means that the input voltage must be at least 1.5V to 2.0V higher than the output voltage for the regulator to operate within its specifications.
-
The LM2825N-5.0 has an operating temperature range of -40°C to 125°C, making it suitable for use in a wide range of applications, including high-temperature environments. However, it's essential to ensure that the device is properly heat-sinked to prevent overheating.