-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for INA2331AIPWT by Texas Instruments
Results Overview of INA2331AIPWT by Texas Instruments
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
INA2331AIPWT Information
INA2331AIPWT by Texas Instruments is an Instrumentation Amplifier.
Instrumentation Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for INA2331AIPWT
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-17647-1-ND
|
DigiKey | IC INST AMP 2 CIRCUIT 14TSSOP Min Qty: 1 Lead time: 12 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
588 In Stock |
|
$1.8209 / $3.4000 | Buy Now |
|
DISTI #
595-INA2331AIPWT
|
Mouser Electronics | Instrumentation Amplifiers Lo-Pwr Single Sply C MOS A 595-INA2331AIPWR RoHS: Compliant | 435 |
|
$1.7500 / $3.4000 | Buy Now |
|
DISTI #
INA2331AIPWT
|
TME | IC: instrumentation amplifier, 2MHz, Ch: 2, TSSOP14, 2.1mV, IB: 10pA Min Qty: 1 | 0 |
|
$2.1900 / $3.7000 | RFQ |
Part Details for INA2331AIPWT
INA2331AIPWT CAD Models
INA2331AIPWT Part Data Attributes
|
|
INA2331AIPWT
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
INA2331AIPWT
Texas Instruments
Low-power, single-supply, CMOS, instrumentation amplifier 14-TSSOP -55 to 125
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | TSSOP | |
| Package Description | TSSOP-14 | |
| Pin Count | 14 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Amplifier Type | INSTRUMENTATION AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.00001 µA | |
| Bandwidth (3dB)-Nom | 2 MHz | |
| Bias Current-Max (IIB) @25C | 0.00001 µA | |
| Common-mode Reject Ratio-Min | 80 dB | |
| Input Offset Current-Max (IIO) | 0.00001 µA | |
| Input Offset Voltage-Max | 1000 µV | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e4 | |
| Length | 5 mm | |
| Moisture Sensitivity Level | 2 | |
| Non-linearity-Max | 0.01% | |
| Number of Functions | 2 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.2 mm | |
| Slew Rate-Nom | 5 V/us | |
| Supply Current-Max | 1.2 mA | |
| Supply Voltage Limit-Max | 7.5 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | MILITARY | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Gain-Max | 1000 | |
| Voltage Gain-Min | 5 | |
| Voltage Gain-Nom | 25 | |
| Width | 4.4 mm |
Alternate Parts for INA2331AIPWT
This table gives cross-reference parts and alternative options found for INA2331AIPWT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of INA2331AIPWT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| INA2331AIPWR | Texas Instruments | $1.6151 | Low-power, single-supply, CMOS, instrumentation amplifier 14-TSSOP -55 to 125 | INA2331AIPWT vs INA2331AIPWR |
| INA2331AIPWRG4 | Texas Instruments | Check for Price | DUAL INSTRUMENTATION AMPLIFIER, 1000uV OFFSET-MAX, 2MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, TSSOP-14 | INA2331AIPWT vs INA2331AIPWRG4 |
| INA2331AIPW | Texas Instruments | Check for Price | DUAL INSTRUMENTATION AMPLIFIER, 1000uV OFFSET-MAX, 2MHz BAND WIDTH, PDSO14, PLASTIC, TSSOP-14 | INA2331AIPWT vs INA2331AIPW |
| INA2331AIPWTG4 | Texas Instruments | Check for Price | DUAL INSTRUMENTATION AMPLIFIER, 1000uV OFFSET-MAX, 2MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, TSSOP-14 | INA2331AIPWT vs INA2331AIPWTG4 |
INA2331AIPWT Frequently Asked Questions (FAQ)
-
A good PCB layout for the INA2331AIPWT involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and placing the device close to the signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated analog ground plane to minimize noise coupling.
-
To ensure accurate current measurement, it's essential to use a high-precision shunt resistor, minimize the PCB trace resistance, and ensure the input voltage is within the recommended range. Additionally, calibrate the device using a known current source and adjust the gain accordingly.
-
The maximum allowable voltage on the input pins of the INA2331AIPWT is ±250mV, exceeding which can cause damage to the device. It's essential to ensure the input voltage is within the recommended range to maintain device reliability.
-
The INA2331AIPWT is optimized for low-frequency current measurement (up to 100 kHz). For high-frequency current measurement, it's recommended to use a different device, such as the INA240 or INA250, which are designed for high-frequency applications.
-
The INA2331AIPWT has an internal overcurrent detection feature that can be used to detect overcurrent conditions. It's recommended to use an external overcurrent protection circuit, such as a fuse or a current limiter, to prevent damage to the device and the system.