Part Details for HV9901NG-GM901 by Microchip Technology Inc
Results Overview of HV9901NG-GM901 by Microchip Technology Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
HV9901NG-GM901 Information
HV9901NG-GM901 by Microchip Technology Inc is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part Details for HV9901NG-GM901
HV9901NG-GM901 CAD Models
HV9901NG-GM901 Part Data Attributes
|
|
HV9901NG-GM901
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
HV9901NG-GM901
Microchip Technology Inc
PWM BASED PRPHL DRVR
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Package Description | , | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.29.00.95 | |
| Input Characteristics | STANDARD | |
| Interface IC Type | PWM BASED PERIPHERAL DRIVER | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 9.9 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Polarity | TRUE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 2 mA | |
| Supply Voltage-Max | 450 V | |
| Supply Voltage-Min | 10 V | |
| Surface Mount | YES | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Turn-off Time | 0.05 µs | |
| Turn-on Time | 0.05 µs | |
| Width | 3.9 mm |
Alternate Parts for HV9901NG-GM901
This table gives cross-reference parts and alternative options found for HV9901NG-GM901. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of HV9901NG-GM901, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| HV9901NG-G-M901 | Microchip Technology Inc | $3.8441 | IC RELAY DRIVER 16SOIC | HV9901NG-GM901 vs HV9901NG-G-M901 |
HV9901NG-GM901 Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and thermal vias is recommended. Ensure that the thermal pad is connected to a large copper area to dissipate heat efficiently.
-
Use a soft-start circuit to limit the inrush current during startup. For shutdown, ensure a gradual decrease in input voltage to prevent voltage spikes.
-
Use a common-mode choke, X-capacitors, and Y-capacitors to filter EMI. Ensure that the layout is optimized to minimize loop areas and reduce radiation.
-
Use a low-dropout regulator for the bias supply, and consider using a low-power mode or shutdown feature to reduce standby power consumption.
-
Ensure good thermal conduction between the device and the heat sink, and consider using thermal interface materials to reduce thermal resistance.