Part Details for HFBR-24E6Z by Broadcom Limited
Results Overview of HFBR-24E6Z by Broadcom Limited
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
HFBR-24E6Z Information
HFBR-24E6Z by Broadcom Limited is a Fiber Optic Receiver.
Fiber Optic Receivers are under the broader part category of Fiber Optics.
Fiber optics are thin glass strands used to transmit light signals over long distances, enabling high-speed data transfer. There are two main types—single mode and multimode fibers. Read more about Fiber Optics on our Fiber Optics part category page.
Price & Stock for HFBR-24E6Z
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
516-2060-ND
|
DigiKey | FIBER OPTIC RECEIVER 160MBD Min Qty: 1 Lead time: 15 Weeks Container: Bulk |
218 In Stock |
|
$16.2625 / $21.7800 | Buy Now |
|
DISTI #
HFBR-24E6Z
|
Avnet Americas | Fiber Optic Receiver, SC Port, 820 nm, 0.16 Gbps, 2700 m - Rail/Tube (Alt: HFBR-24E6Z) RoHS: Compliant Min Qty: 228 Package Multiple: 12 Lead time: 15 Weeks, 0 Days Container: Tube | 0 |
|
$15.6120 / $15.9373 | Buy Now |
|
DISTI #
630-HFBR-24E6Z
|
Mouser Electronics | Fiber Optic Transmitters, Receivers, Transceivers Lo Cos 125MHZ FO Rx w/SC Port Pf RoHS: Compliant | 140 |
|
$16.2600 / $21.7800 | Buy Now |
|
|
Cytech Systems Limited | FIBER OPTIC RECEIVER 160MBD | 72 |
|
RFQ | |
|
DISTI #
HFBR-24E6Z
|
EBV Elektronik | Fiber Optic Receiver SC Port 820 nm 016 Gbps 2700 m (Alt: HFBR-24E6Z) RoHS: Compliant Min Qty: 12 Package Multiple: 12 Lead time: 17 Weeks, 0 Days | EBV - 96 |
|
Buy Now | |
|
|
Neutron USA | Fiber Optic Transmitters, Receivers, Transceivers Lo Cos 125MHZ FO Rx w/SC Port Pf | 50 |
|
$117.5400 | Buy Now |
Part Details for HFBR-24E6Z
HFBR-24E6Z CAD Models
HFBR-24E6Z Part Data Attributes
|
|
HFBR-24E6Z
Broadcom Limited
Buy Now
Datasheet
|
Compare Parts:
HFBR-24E6Z
Broadcom Limited
Receiver, 160Mbps, SC Connector, Through Hole Mount, ROHS COMPLIANT, PLASTIC, 8 PIN
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | BROADCOM INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8517.62.00.50 | |
| Factory Lead Time | 15 Weeks | |
| Additional Feature | OTHER FIBER SIZES: 50/125; 100/140; 200; HCS, DATA RATE(MBD): 5; 20; 32; 55; 125; 155 | |
| Body Breadth | 12.7 mm | |
| Body Height | 10.38 mm | |
| Body Length or Diameter | 28.65 mm | |
| Built-in Feature | AMPLIFIER | |
| Connection Type | SC CONNECTOR | |
| Data Rate | 160 Mbps | |
| Emitter/Detector Type | PIN PHOTODIODE | |
| Fiber Optic Device Type | RECEIVER | |
| Fiber Type | 62.5/125, MMF | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Operating Wavelength-Nom | 820 nm | |
| Reception Type | ANALOG | |
| Sensitivity | -34.4 dBm | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | NO |
Alternate Parts for HFBR-24E6Z
This table gives cross-reference parts and alternative options found for HFBR-24E6Z. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of HFBR-24E6Z, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| HFBR-24E6 | Broadcom Limited | Check for Price | Receiver, 125Mbps, SC Connector, Through Hole Mount, PLASTIC, DIP-8 | HFBR-24E6Z vs HFBR-24E6 |
HFBR-24E6Z Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The transmitter and receiver should be placed close together, and the PCB should be designed to minimize electromagnetic interference (EMI).
-
To ensure reliable data transmission over long distances, use a high-quality cable with low attenuation, minimize electromagnetic interference (EMI) and radio-frequency interference (RFI), and consider using repeaters or amplifiers to boost the signal.
-
The maximum cable length supported by the HFBR-24E6Z is dependent on the cable type and quality, but generally, it can support lengths up to 40 km (24.9 miles) at a data rate of 1.25 Gbps.
-
To troubleshoot issues with the HFBR-24E6Z, check the cable connections, ensure proper termination, and verify that the transmitter and receiver are properly configured. Use diagnostic tools such as oscilloscopes or logic analyzers to identify signal integrity issues.
-
The HFBR-24E6Z is designed to operate in industrial temperature ranges (-40°C to 85°C), but it may not be suitable for extremely harsh environments. Consult the datasheet and application notes for specific guidance on environmental considerations.