Part Details for FK220SA220 by Fischer Elektronik GmbH & Co KG
Results Overview of FK220SA220 by Fischer Elektronik GmbH & Co KG
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Price & Stock for FK220SA220
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
FK220SA220
|
TME | Heatsink: moulded, TO220, black, L: 20.5mm, W: 25mm, H: 7mm, 25K/W Min Qty: 1 | 0 |
|
$0.4000 / $1.0670 | RFQ |
Part Details for FK220SA220
FK220SA220 CAD Models
FK220SA220 Part Data Attributes
|
|
FK220SA220
Fischer Elektronik GmbH & Co KG
Buy Now
Datasheet
|
Compare Parts:
FK220SA220
Fischer Elektronik GmbH & Co KG
Heat Sink, 25ohm, Transverse, Aluminum Alloy, Anodized,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | FISCHER ELEKTRONIK GMBH & CO KG | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Fischer Elektronik GmbH & Co. KG | |
| Body Material | ALUMINUM ALLOY | |
| Color | BLACK | |
| Device Used On | TRANSISTOR | |
| Fin Orientation | TRANSVERSE | |
| Finish | ANODIZED | |
| Height | 20.5 mm | |
| Length | 25 mm | |
| Thermal Resistance | 25 Ω | |
| Thermal Support Device Type | HEAT SINK | |
| Width | 7 mm |
FK220SA220 Frequently Asked Questions (FAQ)
-
The recommended torque is 0.5 Nm to 1.5 Nm, depending on the heat sink material and thread type. It's essential to consult the heat sink manufacturer's guidelines for specific torque values.
-
While the FK220SA220 is designed for standard heat sinks, it's possible to use it with non-standard heat sinks. However, you'll need to ensure the heat sink's dimensions and thread type are compatible with the FK220SA220. Consult Fischer Elektronik's technical support for guidance.
-
Apply a thin, even layer of thermal interface material (TIM) to the FK220SA220's base plate before mounting it to the heat sink. Ensure the TIM is compatible with the heat sink material and follow the manufacturer's application instructions.
-
The FK220SA220 is designed to operate up to 150°C, but the maximum operating temperature may vary depending on the specific application and environmental conditions. Consult Fischer Elektronik's technical support for guidance on temperature derating.
-
The FK220SA220 is designed to withstand moderate vibrations, but it's essential to ensure the heat sink and mounting system are securely fastened to prevent damage or detachment. Consult Fischer Elektronik's technical support for guidance on vibration testing and certification.