Part Details for DSPIC33CK64MP506I/PT by Microchip Technology Inc
Results Overview of DSPIC33CK64MP506I/PT by Microchip Technology Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DSPIC33CK64MP506I/PT Information
DSPIC33CK64MP506I/PT by Microchip Technology Inc is a Digital Signal Processor.
Digital Signal Processors are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for DSPIC33CK64MP506I/PT
DSPIC33CK64MP506I/PT CAD Models
DSPIC33CK64MP506I/PT Part Data Attributes
|
|
DSPIC33CK64MP506I/PT
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
DSPIC33CK64MP506I/PT
Microchip Technology Inc
Microcontroller
|
| Rohs Code | No | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Package Description | TFQFP, TQFP64,.47SQ | |
| Reach Compliance Code | unknown | |
| ECCN Code | 3A991.A.2 | |
| HTS Code | 8542.31.00.01 | |
| Date Of Intro | 2018-07-30 | |
| Address Bus Width | ||
| Barrel Shifter | YES | |
| Bit Size | 16 | |
| Boundary Scan | YES | |
| Clock Frequency-Max | 64 MHz | |
| External Data Bus Width | ||
| Format | FIXED POINT | |
| Integrated Cache | NO | |
| Internal Bus Architecture | MULTIPLE | |
| JESD-30 Code | S-PQFP-G64 | |
| JESD-609 Code | e3 | |
| Length | 10 mm | |
| Low Power Mode | YES | |
| Number of DMA Channels | 4 | |
| Number of External Interrupts | 4 | |
| Number of Serial I/Os | 4 | |
| Number of Terminals | 64 | |
| Number of Timers | 2 | |
| On Chip Data RAM Width | 8 | |
| On Chip Program ROM Width | 24 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TFQFP | |
| Package Equivalence Code | QFP64,.47SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, THIN PROFILE, FINE PITCH | |
| RAM (words) | 8192 | |
| ROM Programmability | FLASH | |
| Screening Level | TS 16949 | |
| Seated Height-Max | 1.2 mm | |
| Supply Current-Max | 35 mA | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 10 mm | |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
Alternate Parts for DSPIC33CK64MP506I/PT
This table gives cross-reference parts and alternative options found for DSPIC33CK64MP506I/PT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DSPIC33CK64MP506I/PT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DSPIC33CK64MP506-I/PT | Microchip Technology Inc | $2.3584 | dsPIC33C 100MHz 64K Dual Panel Flash 8K RAM CAN-FD OpAmps 12bit ADCs PWM | DSPIC33CK64MP506I/PT vs DSPIC33CK64MP506-I/PT |
| DSPIC33CK64MP506-E/PT | Microchip Technology Inc | $2.6648 | dsPIC33C 100MHz 64K Dual Panel Flash 8K RAM CAN-FD OpAmps 12bit ADCs PWM | DSPIC33CK64MP506I/PT vs DSPIC33CK64MP506-E/PT |
| DSPIC33CK64MP506T-I/PT | Microchip Technology Inc | Check for Price | Digital Signal Processor, 16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PQFP64 | DSPIC33CK64MP506I/PT vs DSPIC33CK64MP506T-I/PT |
| DSPIC33CK64MP506-H/PT | Microchip Technology Inc | Check for Price | Microcontroller | DSPIC33CK64MP506I/PT vs DSPIC33CK64MP506-H/PT |
| DSPIC33CK64MP506T-E/PTVAO | Microchip Technology Inc | Check for Price | 16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PQFP64 | DSPIC33CK64MP506I/PT vs DSPIC33CK64MP506T-E/PTVAO |
DSPIC33CK64MP506I/PT Frequently Asked Questions (FAQ)
-
The maximum clock frequency that can be achieved with an external crystal oscillator is 120 MHz, but it depends on the specific crystal oscillator used and the board layout.
-
To configure the oscillator for optimal performance, refer to the 'Oscillator Configuration' section in the datasheet and follow the recommended settings for the specific oscillator mode used (e.g., HS, HSPLL, or EC).
-
The maximum amount of current that can be sourced or sunk by the GPIO pins is 25 mA, but it's recommended to limit the current to 10 mA or less to ensure reliable operation.
-
To implement a watchdog timer, enable the WDT module, set the timeout period, and periodically reset the WDT counter using the CLRWDT or CLRWDT instructions. Refer to the 'Watchdog Timer' section in the datasheet for more information.
-
The minimum voltage range for the device is 2.2V and the maximum voltage range is 3.6V. Operating the device outside of this range may affect its performance and reliability.