Part Details for DS90CF383MTDX/NOPB by National Semiconductor Corporation
Results Overview of DS90CF383MTDX/NOPB by National Semiconductor Corporation
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DS90CF383MTDX/NOPB Information
DS90CF383MTDX/NOPB by National Semiconductor Corporation is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for DS90CF383MTDX/NOPB
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
2156-DS90CF383MTDX/NOPB-ND
|
DigiKey | LINE DRIVER, 1 FUNC, 5 DRIVER, C Min Qty: 63 Lead time: 1 Weeks Container: Bulk MARKETPLACE PRODUCT |
3468 In Stock |
|
$4.7900 | Buy Now |
|
DISTI #
87486537
|
Verical | LVDS Transmitter 455Mbps 0.45V 56-Pin TSSOP T/R Min Qty: 66 Package Multiple: 1 Date Code: 1101 | Americas - 3468 |
|
$4.6125 / $5.7625 | Buy Now |
|
|
Rochester Electronics | DS90CF383 3.3-V LVDS 24-bit flat panel display (FPD-Link) - 65 MHz RoHS: Compliant Status: Not Recommended for New Designs Min Qty: 1 | 3468 |
|
$3.6900 / $4.6100 | Buy Now |
Part Details for DS90CF383MTDX/NOPB
DS90CF383MTDX/NOPB CAD Models
DS90CF383MTDX/NOPB Part Data Attributes
|
|
DS90CF383MTDX/NOPB
National Semiconductor Corporation
Buy Now
Datasheet
|
Compare Parts:
DS90CF383MTDX/NOPB
National Semiconductor Corporation
IC LINE DRIVER, PDSO56, LOW PROFILE, PLASTIC, TSSOP-56, Line Driver or Receiver
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | NATIONAL SEMICONDUCTOR CORP | |
| Package Description | LOW PROFILE, PLASTIC, TSSOP-56 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Differential Output | YES | |
| Driver Number of Bits | 5 | |
| Input Characteristics | STANDARD | |
| Interface IC Type | LINE DRIVER | |
| Interface Standard | EIA-644; TIA-644 | |
| JESD-30 Code | R-PDSO-G56 | |
| JESD-609 Code | e3 | |
| Length | 14 mm | |
| Moisture Sensitivity Level | 2 | |
| Number of Functions | 1 | |
| Number of Terminals | 56 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | TOTEM-POLE | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP56,.3,20 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | ||
| Seated Height-Max | 1.2 mm | |
| Supply Current-Max | 55 mA | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 40 | |
| Width | 6.1 mm |
Alternate Parts for DS90CF383MTDX/NOPB
This table gives cross-reference parts and alternative options found for DS90CF383MTDX/NOPB. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS90CF383MTDX/NOPB, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS90CF383AMTDX | National Semiconductor Corporation | Check for Price | IC 5 LINE DRIVER, PDSO56, LOW PROFILE, PLASTIC, TSSOP-56, Line Driver or Receiver | DS90CF383MTDX/NOPB vs DS90CF383AMTDX |
| DS90CF383MTD | Texas Instruments | Check for Price | LINE DRIVER, PDSO56, PLASTIC, TSSOP-56 | DS90CF383MTDX/NOPB vs DS90CF383MTD |
| DS90CF383AMTDX | Texas Instruments | Check for Price | 5 LINE DRIVER, PDSO56, LOW PROFILE, PLASTIC, TSSOP-56 | DS90CF383MTDX/NOPB vs DS90CF383AMTDX |
| DS90C383BMTX/NOPB | National Semiconductor Corporation | Check for Price | IC LINE DRIVER, PDSO56, TSSOP-56, Line Driver or Receiver | DS90CF383MTDX/NOPB vs DS90C383BMTX/NOPB |
| SN75LVDS83DGGR | Texas Instruments | Check for Price | FlatLink™ Transmitter 56-TSSOP 0 to 70 | DS90CF383MTDX/NOPB vs SN75LVDS83DGGR |
| DS90CF383BMT | Texas Instruments | Check for Price | LINE DRIVER, PDSO56, TSSOP-56 | DS90CF383MTDX/NOPB vs DS90CF383BMT |
| DS90C383MTDX/NOPB | Texas Instruments | Check for Price | 3.3-V programmable LVDS transmitter 24-bit flat panel display (FPD-Link) - 65 MHz 56-TSSOP | DS90CF383MTDX/NOPB vs DS90C383MTDX/NOPB |
DS90CF383MTDX/NOPB Frequently Asked Questions (FAQ)
-
The recommended PCB layout for optimal performance of the DS90CF383MTDX/NOPB involves keeping the input and output traces as short as possible, using a solid ground plane, and minimizing the distance between the device and the connector. Additionally, it is recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
To ensure reliable operation of the DS90CF383MTDX/NOPB in high-temperature environments, it is recommended to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive material for the PCB, and ensuring good airflow around the device. Additionally, it is recommended to operate the device within its specified temperature range and to avoid exceeding the maximum junction temperature.
-
The DS90CF383MTDX/NOPB is a high-speed device that can be susceptible to EMI and RFI. To minimize EMI and RFI, it is recommended to use proper shielding, such as a metal enclosure, and to keep the device away from sources of electromagnetic interference. Additionally, it is recommended to use a low-pass filter or a ferrite bead on the input and output lines to reduce high-frequency noise.
-
To troubleshoot issues with the DS90CF383MTDX/NOPB, it is recommended to follow a systematic approach, starting with a visual inspection of the PCB and device for any signs of damage or defects. Next, use a logic analyzer or oscilloscope to verify the input and output signals, and check for any signs of signal degradation or distortion. Finally, consult the datasheet and application notes for troubleshooting guides and FAQs.
-
The DS90CF383MTDX/NOPB requires a specific power sequencing to ensure reliable operation. The recommended power sequencing is to apply the power supply voltage (VCC) before applying the input signals, and to ensure that the power supply voltage is stable before enabling the device. Additionally, it is recommended to use a power-on reset circuit to ensure that the device is properly reset during power-up.