Part Details for DS9093RA+ by Maxim Integrated Products
Results Overview of DS9093RA+ by Maxim Integrated Products
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Internet of Things (IoT)
Computing and Data Storage
Healthcare
Agriculture Technology
Medical Imaging
DS9093RA+ Information
DS9093RA+ by Maxim Integrated Products is an Other Memory IC.
Other Memory ICs are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for DS9093RA+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
73Y1721
|
Newark | Lock Ring, Ibutton, Stainless Steel, Accessory Type:Lock Ring, For Use With:Ibuttons, Product Range:-, Msl:- Rohs Compliant: Yes |Maxim Integrated/analog Devices DS9093RA+ RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 22 |
|
$0.5860 / $0.9100 | Buy Now |
|
DISTI #
DS9093RA+-ND
|
DigiKey | IBUTTON LOCK Min Qty: 1 Lead time: 10 Weeks Container: Box |
1126 In Stock |
|
$0.6652 / $0.8800 | Buy Now |
|
|
Cytech Systems Limited | IBUTTON LOCK | 32 |
|
RFQ |
Part Details for DS9093RA+
DS9093RA+ CAD Models
DS9093RA+ Part Data Attributes
|
|
DS9093RA+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS9093RA+
Maxim Integrated Products
Memory Circuit, CMOS,
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 3926.90.99.85 | |
| JESD-30 Code | X-XXSS-X | |
| JESD-609 Code | e3 | |
| Memory IC Type | MEMORY CIRCUIT | |
| Number of Functions | 1 | |
| Package Body Material | UNSPECIFIED | |
| Package Shape | UNSPECIFIED | |
| Package Style | SPECIAL SHAPE | |
| Qualification Status | Not Qualified | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | UNSPECIFIED | |
| Terminal Position | UNSPECIFIED |
Alternate Parts for DS9093RA+
This table gives cross-reference parts and alternative options found for DS9093RA+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS9093RA+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS9093RA+ | Analog Devices Inc | Check for Price | iButton Plastic Card Mounts, N/A, 0 to 70C | DS9093RA+ vs DS9093RA+ |
DS9093RA+ Frequently Asked Questions (FAQ)
-
The maximum cable length supported by the DS9093RA+ is 100 meters (330 feet) for a single-master configuration and 30 meters (100 feet) for a multi-master configuration.
-
To ensure reliable data transmission over long cables, use a shielded twisted-pair cable, keep the cable away from noise sources, and use a common mode choke or ferrite bead to reduce electromagnetic interference (EMI).
-
The internal 5kΩ pull-up resistors on the DQ and DQb pins are used to ensure that the 1-Wire bus is properly terminated and to reduce electromagnetic radiation.
-
Yes, the DS9093RA+ can operate with a 3.3V power supply, but the output voltage on the VCC pin must be regulated to 5V to ensure compatibility with 5V 1-Wire devices.
-
To handle hot-swapping of 1-Wire devices, use a 1kΩ to 10kΩ resistor in series with the DQ pin to limit the inrush current and prevent bus contention.