Part Details for DRV5013AGELPGMQ1 by Texas Instruments
Results Overview of DRV5013AGELPGMQ1 by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DRV5013AGELPGMQ1 Information
DRV5013AGELPGMQ1 by Texas Instruments is a Magnetic Field Sensor.
Magnetic Field Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Price & Stock for DRV5013AGELPGMQ1
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-40041-1-ND
|
DigiKey | MAGNETIC SWITCH LATCH TO92-3 Min Qty: 1 Lead time: 12 Weeks Container: Cut Tape (CT), Tape & Box (TB) | Temporarily Out of Stock |
|
$0.2498 / $0.4900 | Buy Now |
|
DISTI #
595-DRV5013AGELPGMQ1
|
Mouser Electronics | Board Mount Hall Effect / Magnetic Sensors Auto Digital-Latch H all Effect Sensor A 595-DRV5013AGELPGQ1 RoHS: Compliant | 0 |
|
$0.2320 / $0.5700 | Order Now |
Part Details for DRV5013AGELPGMQ1
DRV5013AGELPGMQ1 CAD Models
DRV5013AGELPGMQ1 Part Data Attributes
|
|
DRV5013AGELPGMQ1
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
DRV5013AGELPGMQ1
Texas Instruments
Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch 3-TO-92 -40 to 150
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Package Description | TO-92, 3 PIN | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Samacsys Manufacturer | Texas Instruments | |
| Additional Feature | AEC-Q100, SHORT CIRCUIT PROTECTION, REVERSE SUPPLY PROTECTION | |
| Body Breadth | 1.52 mm | |
| Body Height | 5.05 mm | |
| Body Length or Diameter | 4 mm | |
| Housing | PLASTIC | |
| Hysteresis | 12 mT | |
| Input Mode | BIPOLAR(LATCHED) | |
| JESD-609 Code | e3 | |
| Magnetic Field Range-Max | 9 mT | |
| Magnetic Field Range-Min | -9 mT | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Number of Terminals | 3 | |
| Operating Current-Max | 3.5 mA | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -40 °C | |
| Output | OPEN-DRAIN | |
| Output Current-Max | 30 mA | |
| Output Interface Type | 2-WIRE INTERFACE | |
| Output Range | 0-30mA | |
| Output Type | CURRENT OUTPUT | |
| Package Shape/Style | RECTANGULAR | |
| Screening Level | AEC-Q100 | |
| Sensors/Transducers Type | MAGNETIC FIELD SENSOR,HALL EFFECT | |
| Supply Voltage-Max | 38 V | |
| Supply Voltage-Min | 2.7 V | |
| Surface Mount | NO | |
| Terminal Finish | Matte Tin (Sn) | |
| Termination Type | SOLDER |
Alternate Parts for DRV5013AGELPGMQ1
This table gives cross-reference parts and alternative options found for DRV5013AGELPGMQ1. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DRV5013AGELPGMQ1, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DRV5013AGQDBZT | Texas Instruments | $0.1625 | High voltage (up to 38V), high bandwidth (30kHz) Hall-effect latch 3-SOT-23 -40 to 125 | DRV5013AGELPGMQ1 vs DRV5013AGQDBZT |
| DRV5013AGQDBZRQ1 | Texas Instruments | $0.1978 | Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch 3-SOT-23 -40 to 125 | DRV5013AGELPGMQ1 vs DRV5013AGQDBZRQ1 |
| DRV5013AGQLPGMQ1 | Texas Instruments | $0.2119 | Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch 3-TO-92 -40 to 125 | DRV5013AGELPGMQ1 vs DRV5013AGQLPGMQ1 |
| PDRV5013AGQDBZT | Texas Instruments | Check for Price | MAGNETIC FIELD SENSOR-HALL EFFECT | DRV5013AGELPGMQ1 vs PDRV5013AGQDBZT |
DRV5013AGELPGMQ1 Frequently Asked Questions (FAQ)
-
A good PCB layout for the DRV5013 involves keeping the high-current paths short and wide, using a solid ground plane, and placing the decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
-
The inductor value depends on the input voltage, output voltage, and switching frequency. A good starting point is to use the inductor value recommended in the datasheet. You can also use online inductor selection tools or consult with a TI engineer for more guidance.
-
The maximum ambient temperature for the DRV5013 is 85°C. However, the device can operate at higher temperatures with derating. Consult the datasheet for more information on thermal derating.
-
Yes, the DRV5013 is qualified for automotive and industrial applications. It meets the requirements for AEC-Q100 and is suitable for high-reliability applications. However, it's essential to follow proper design and manufacturing guidelines to ensure the device operates within its specifications.
-
To troubleshoot issues with the DRV5013, start by checking the input voltage, output voltage, and current. Verify that the device is properly soldered and that the PCB layout is correct. Use an oscilloscope to check for switching noise and ringing. Consult the datasheet and application notes for more guidance on troubleshooting.