Part Details for DD285N04K by Infineon Technologies AG
Results Overview of DD285N04K by Infineon Technologies AG
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DD285N04K Information
DD285N04K by Infineon Technologies AG is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Part Details for DD285N04K
DD285N04K CAD Models
DD285N04K Part Data Attributes
|
|
DD285N04K
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
DD285N04K
Infineon Technologies AG
Rectifier Diode, 1 Phase, 2 Element, 285A, 400V V(RRM), Silicon, MODULE-3
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | MODULE | |
| Package Description | R-XUFM-X3 | |
| Pin Count | 3 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.80 | |
| Application | GENERAL PURPOSE | |
| Case Connection | ISOLATED | |
| Configuration | SERIES CONNECTED, CENTER TAP, 2 ELEMENTS | |
| Diode Element Material | SILICON | |
| Diode Type | RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1.15 V | |
| JESD-30 Code | R-XUFM-X3 | |
| Non-rep Pk Forward Current-Max | 8300 A | |
| Number of Elements | 2 | |
| Number of Phases | 1 | |
| Number of Terminals | 3 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 285 A | |
| Package Body Material | UNSPECIFIED | |
| Package Shape | RECTANGULAR | |
| Package Style | FLANGE MOUNT | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Reference Standard | UL RECOGNIZED | |
| Rep Pk Reverse Voltage-Max | 400 V | |
| Reverse Current-Max | 20000 µA | |
| Surface Mount | NO | |
| Terminal Form | UNSPECIFIED | |
| Terminal Position | UPPER | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
DD285N04K Frequently Asked Questions (FAQ)
-
The maximum junction temperature (Tj) for the DD285N04K is 175°C, as specified in the datasheet. However, it's recommended to keep the junction temperature below 150°C for optimal performance and reliability.
-
Proper cooling is crucial for the DD285N04K. Ensure good thermal contact between the device and the heat sink, and use a thermal interface material (TIM) if necessary. The heat sink should be designed to dissipate the maximum power dissipation of the device, which is 280 W.
-
The recommended gate drive voltage for the DD285N04K is between 10 V and 15 V. However, the optimal gate drive voltage may vary depending on the specific application and switching frequency. It's recommended to consult the datasheet and application notes for more information.
-
Yes, the DD285N04K can be used in a parallel configuration to increase the current handling capability. However, it's essential to ensure that the devices are properly matched, and the gate drive signals are synchronized to prevent uneven current sharing.
-
The recommended dead time for the DD285N04K is typically in the range of 100 ns to 500 ns, depending on the specific application and switching frequency. The dead time should be set to ensure that the device is not switching during the transition periods.