Part Details for CY7C68000A-56LFXC by Cypress Semiconductor
Results Overview of CY7C68000A-56LFXC by Cypress Semiconductor
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
CY7C68000A-56LFXC Information
CY7C68000A-56LFXC by Cypress Semiconductor is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part Details for CY7C68000A-56LFXC
CY7C68000A-56LFXC CAD Models
CY7C68000A-56LFXC Part Data Attributes
|
|
CY7C68000A-56LFXC
Cypress Semiconductor
Buy Now
Datasheet
|
Compare Parts:
CY7C68000A-56LFXC
Cypress Semiconductor
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, 8 X 8 MM, VQFN-56
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | CYPRESS SEMICONDUCTOR CORP | |
| Part Package Code | QFN | |
| Package Description | 8 X 8 MM, VQFN-56 | |
| Pin Count | 56 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Driver Number of Bits | 1 | |
| Input Characteristics | STANDARD | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | GENERAL PURPOSE | |
| JESD-30 Code | S-XQCC-N56 | |
| JESD-609 Code | e3 | |
| Length | 8 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 1 | |
| Number of Terminals | 56 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | UNSPECIFIED | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC56,.31SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1 mm | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 20 | |
| Width | 8 mm |
CY7C68000A-56LFXC Frequently Asked Questions (FAQ)
-
The CY7C68000A-56LFXC has an industrial temperature range of -40°C to +85°C.
-
The FIFO interface can be configured using the FX2LP's EEPROM or through software using the Cypress-provided API. The FIFO interface can be set to operate in either a 16-bit or 32-bit mode, and the FIFO depth can be set to 4KB, 8KB, or 16KB.
-
The CY7C68000A-56LFXC supports high-speed USB 2.0 with a maximum data transfer rate of 480 Mbps.
-
Yes, the CY7C68000A-56LFXC can be used as a USB device controller only, without using the GPIF interface. In this mode, the device can be configured to operate as a standard USB device, such as a USB mass storage device or a USB CDC device.
-
The CY7C68000A-56LFXC has a typical power consumption of 250 mA in high-speed mode and 50 mA in low-power mode.