Part Details for CY7B933-JXIT by Cypress Semiconductor
Results Overview of CY7B933-JXIT by Cypress Semiconductor
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
CY7B933-JXIT Information
CY7B933-JXIT by Cypress Semiconductor is an Other Telecom IC.
Other Telecom ICs are under the broader part category of Telecommunication Circuits.
A telecommunications circuit transmits and receives information between points. Key components include transmitters, receivers, amplifiers, and multiplexers. Read more about Telecommunication Circuits on our Telecommunication Circuits part category page.
Part Details for CY7B933-JXIT
CY7B933-JXIT CAD Models
CY7B933-JXIT Part Data Attributes
|
|
CY7B933-JXIT
Cypress Semiconductor
Buy Now
Datasheet
|
Compare Parts:
CY7B933-JXIT
Cypress Semiconductor
Telecom Circuit, 1-Func, BICMOS, PQCC28, LCC-28
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | CYPRESS SEMICONDUCTOR CORP | |
| Part Package Code | QLCC | |
| Pin Count | 28 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 5A991.B.1 | |
| HTS Code | 8542.39.00.01 | |
| JESD-30 Code | S-PQCC-J28 | |
| JESD-609 Code | e3 | |
| Length | 11.53 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 1 | |
| Number of Terminals | 28 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | QCCJ | |
| Package Equivalence Code | LDCC28,.5X.6 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.57 mm | |
| Supply Current-Max | 0.16 mA | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | BICMOS | |
| Telecom IC Type | TELECOM CIRCUIT | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | J BEND | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 20 | |
| Width | 11.53 mm |
Alternate Parts for CY7B933-JXIT
This table gives cross-reference parts and alternative options found for CY7B933-JXIT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of CY7B933-JXIT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| CY7B933-JXIT | Infineon Technologies AG | Check for Price | Telecom Circuit, 1-Func, BICMOS, PQCC28, LCC-28 | CY7B933-JXIT vs CY7B933-JXIT |
| CY7B933-JXI | Infineon Technologies AG | Check for Price | Telecom Circuit, 1-Func, BICMOS, PQCC28, LCC-28 | CY7B933-JXIT vs CY7B933-JXI |
| CY7B933-JXCT | Infineon Technologies AG | Check for Price | Telecom Circuit, 1-Func, BICMOS, PQCC28, LCC-28 | CY7B933-JXIT vs CY7B933-JXCT |
CY7B933-JXIT Frequently Asked Questions (FAQ)
-
The maximum frequency of operation for the CY7B933-JXIT is 66 MHz.
-
To configure the CY7B933-JXIT for PCIe operation, you need to set the CFG[2:0] pins to '010' and ensure that the PERST# pin is tied low. Additionally, you need to configure the device using the PCIe configuration registers.
-
The power consumption of the CY7B933-JXIT varies depending on the operating frequency and mode. In PCIe mode, the typical power consumption is around 1.5W. In SATA mode, the typical power consumption is around 1.2W.
-
To implement a PCIe endpoint using the CY7B933-JXIT, you need to configure the device as a PCIe endpoint, implement a PCIe protocol layer, and develop a device driver to interact with the operating system.
-
The maximum data transfer rate of the CY7B933-JXIT is 5 Gbps in PCIe mode and 3 Gbps in SATA mode.