Part Details for AMMP-6545-BLKG by Broadcom Limited
Results Overview of AMMP-6545-BLKG by Broadcom Limited
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
AMMP-6545-BLKG Information
AMMP-6545-BLKG by Broadcom Limited is an RF/Microwave Mixer.
RF/Microwave Mixers are under the broader part category of RF and Microwave Components.
RF and Microwave Engineering focuses on the design and operation of devices that transmit or receive radio waves. The main distinction between RF and microwave engineering is their wavelength, which influences how energy is transmitted and used in various applications. Read more about RF and Microwave Components on our RF and Microwave part category page.
Part Details for AMMP-6545-BLKG
AMMP-6545-BLKG CAD Models
AMMP-6545-BLKG Part Data Attributes
|
|
AMMP-6545-BLKG
Broadcom Limited
Buy Now
Datasheet
|
Compare Parts:
AMMP-6545-BLKG
Broadcom Limited
Double Balanced Mixer, 18000MHz Min, 40000MHz Max, 12dB Conversion Loss-Max, 5 X 5 MM, 8 PIN
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | BROADCOM LTD | |
| Package Description | LCC8,.2SQ,28 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Characteristic Impedance | 50 Ω | |
| Construction | COMPONENT | |
| Conversion Loss-Max | 12 dB | |
| Input Power-Max (CW) | 25 dBm | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Terminals | 8 | |
| Operating Frequency-Max | 40000 MHz | |
| Operating Frequency-Min | 18000 MHz | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | LCC8,.2SQ,28 | |
| RF/Microwave Device Type | DOUBLE BALANCED | |
| Surface Mount | YES |
Alternate Parts for AMMP-6545-BLKG
This table gives cross-reference parts and alternative options found for AMMP-6545-BLKG. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AMMP-6545-BLKG, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AMMP-6545 | Broadcom Limited | Check for Price | Double Balanced Mixer, | AMMP-6545-BLKG vs AMMP-6545 |
AMMP-6545-BLKG Frequently Asked Questions (FAQ)
-
Broadcom recommends a 4-layer PCB with a solid ground plane, and thermal vias under the package to dissipate heat. A thermal pad on the bottom of the package should be connected to a thermal plane on the PCB.
-
Use a controlled impedance PCB design, route high-speed signals on inner layers, and add EMI shielding around the device. Also, follow the recommended layout guidelines for the device's high-speed interfaces.
-
The device requires a specific power-up sequence, with a slow ramp-up time (typically 10-20 ms) to prevent latch-up and ensure reliable operation. Refer to the application note for detailed guidelines.
-
The BIST feature is enabled through a specific register setting. Refer to the device's programming guide for details on how to enable and execute the BIST. The test results can be read from the device's status registers.
-
The recommended clocking and PLL settings depend on the specific application and frequency requirements. Refer to the device's datasheet and application notes for guidelines on configuring the clocking and PLL for optimal performance.