-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for ADS7040IDCUT by Texas Instruments
Results Overview of ADS7040IDCUT by Texas Instruments
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
ADS7040IDCUT Information
ADS7040IDCUT by Texas Instruments is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for ADS7040IDCUT
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-ADS7040IDCUTCT-ND
|
DigiKey | IC ADC 8BIT SAR 8VSSOP Min Qty: 1 Lead time: 12 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
928 In Stock |
|
$0.7041 / $1.4900 | Buy Now |
|
DISTI #
595-ADS7040IDCUT
|
Mouser Electronics | Analog to Digital Converters - ADC LowPwrUltra-SmallSAR ADC 8-bit 1MSPS A 595-ADS7040IDCUR RoHS: Compliant | 319 |
|
$0.7170 / $1.4900 | Buy Now |
|
|
Cytech Systems Limited | IC ADC 8BIT SAR 8VSSOP | 1250 |
|
RFQ | |
|
|
Win Source Electronics | IC ADC 8BIT 1MSPS US8 | 66218 |
|
$0.8082 / $1.2121 | Buy Now |
Part Details for ADS7040IDCUT
ADS7040IDCUT CAD Models
ADS7040IDCUT Part Data Attributes
|
|
ADS7040IDCUT
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
ADS7040IDCUT
Texas Instruments
Ultra-low-power, ultra-small-size SAR ADC, 8 bit, 1 MSPS, single ended 8-VSSOP -40 to 125
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Package Description | VSSOP-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Analog Input Voltage-Max | 3.6 V | |
| Analog Input Voltage-Min | ||
| Converter Type | ADC, SUCCESSIVE APPROXIMATION | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Length | 2.3 mm | |
| Linearity Error-Max (EL) | 0.1953% | |
| Moisture Sensitivity Level | 1 | |
| Number of Analog In Channels | 1 | |
| Number of Bits | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Bit Code | BINARY | |
| Output Format | SERIAL | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VSSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Sample Rate | 1 MHz | |
| Sample and Hold / Track and Hold | SAMPLE | |
| Seated Height-Max | 0.9 mm | |
| Supply Current-Max | 185 mA | |
| Supply Voltage-Min | 1.65 V | |
| Supply Voltage-Nom | 3 V | |
| Surface Mount | YES | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 2 mm |
Alternate Parts for ADS7040IDCUT
This table gives cross-reference parts and alternative options found for ADS7040IDCUT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADS7040IDCUT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADS7040IDCUR | Texas Instruments | $0.5212 | Ultra-low-power, ultra-small-size SAR ADC, 8 bit, 1 MSPS, single ended 8-VSSOP -40 to 125 | ADS7040IDCUT vs ADS7040IDCUR |
| ADS7040IRUGR | Texas Instruments | $0.5525 | Ultra-low-power, ultra-small-size SAR ADC, 8 bit, 1 MSPS, single ended 8-X2QFN -40 to 125 | ADS7040IDCUT vs ADS7040IRUGR |
ADS7040IDCUT Frequently Asked Questions (FAQ)
-
Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate. The analog input traces should be short and direct, and the digital output traces should be routed away from the analog inputs. Additionally, decoupling capacitors should be placed close to the device.
-
The ADS7040IDCUT has a built-in POR and BOR circuitry that resets the device during power-up and power-down sequences. To handle this, ensure that the power supply ramps up and down slowly, and that the device is held in reset until the power supply is stable. Additionally, the device's reset pin can be connected to a external reset circuit or a microcontroller to control the reset sequence.
-
The ADS7040IDCUT can operate with a clock frequency up to 1 MHz, but the recommended frequency is 500 kHz. The device can use an external clock source, such as a crystal oscillator or a clock generator, or it can use its internal clock source. However, using an external clock source is recommended for better accuracy and stability.
-
The ADS7040IDCUT has a built-in calibration circuitry that can be used to calibrate the device. The calibration process involves applying a known input voltage and adjusting the device's internal registers to achieve optimal accuracy. Texas Instruments provides a calibration procedure in the device's datasheet and application notes.
-
The ADS7040IDCUT can accept input signals in the range of 0 to 5 V, and the recommended input impedance is 1 kΩ or higher. The device can also accept differential input signals, and the recommended common-mode voltage is 2.5 V.