Part Details for AD8607ARMZ-R2 by Analog Devices Inc
Results Overview of AD8607ARMZ-R2 by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Electronic Manufacturing
AD8607ARMZ-R2 Information
AD8607ARMZ-R2 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD8607ARMZ-R2
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 996 |
|
RFQ | |
|
|
Win Source Electronics | IC OPAMP GP 400KHZ RRO 8MSOP | 11470 |
|
$1.0500 / $1.3562 | Buy Now |
Part Details for AD8607ARMZ-R2
AD8607ARMZ-R2 CAD Models
AD8607ARMZ-R2 Part Data Attributes
|
|
AD8607ARMZ-R2
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8607ARMZ-R2
Analog Devices Inc
IC DUAL OP-AMP, 700 uV OFFSET-MAX, 0.385 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-187AA, MSOP-8, Operational Amplifier
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | ROHS COMPLIANT, MO-187AA, MSOP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.0005 µA | |
| Bias Current-Max (IIB) @25C | 0.000001 µA | |
| Common-mode Reject Ratio-Nom | 98 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 700 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | ||
| Neg Supply Voltage-Nom (Vsup) | ||
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TAPE AND REEL | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 0.1 V/us | |
| Supply Current-Max | 0.12 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 1.8 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 385 | |
| Voltage Gain-Min | 100000 | |
| Width | 3 mm |
Alternate Parts for AD8607ARMZ-R2
This table gives cross-reference parts and alternative options found for AD8607ARMZ-R2. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8607ARMZ-R2, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8607ARMZ | Analog Devices Inc | $2.3474 | Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier | AD8607ARMZ-R2 vs AD8607ARMZ |
| AD8607ARZ | Analog Devices Inc | $2.4063 | Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier | AD8607ARMZ-R2 vs AD8607ARZ |
| AD8607ARZ-REEL7 | Analog Devices Inc | $2.4081 | Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier | AD8607ARMZ-R2 vs AD8607ARZ-REEL7 |
| AD8607ARZ-REEL | Analog Devices Inc | $2.4546 | Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier | AD8607ARMZ-R2 vs AD8607ARZ-REEL |
| AD8607ARMZ-REEL | Analog Devices Inc | $2.5604 | Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier | AD8607ARMZ-R2 vs AD8607ARMZ-REEL |
| AD8607AR-REEL7 | Analog Devices Inc | Check for Price | IC DUAL OP-AMP, 700 uV OFFSET-MAX, 0.385 MHz BAND WIDTH, PDSO8, MS-012AA, SOIC-8, Operational Amplifier | AD8607ARMZ-R2 vs AD8607AR-REEL7 |
| AD8607AR-REEL | Analog Devices Inc | Check for Price | IC DUAL OP-AMP, 700 uV OFFSET-MAX, 0.385 MHz BAND WIDTH, PDSO8, MS-012AA, SOIC-8, Operational Amplifier | AD8607ARMZ-R2 vs AD8607AR-REEL |
| AD8607AR | Analog Devices Inc | Check for Price | IC DUAL OP-AMP, 700 uV OFFSET-MAX, 0.385 MHz BAND WIDTH, PDSO8, MS-012AA, SOIC-8, Operational Amplifier | AD8607ARMZ-R2 vs AD8607AR |
AD8607ARMZ-R2 Frequently Asked Questions (FAQ)
-
The AD8607 datasheet provides general guidelines for layout and placement, but it's recommended to follow Analog Devices' application note AN-1116 for more detailed guidance on minimizing noise and ensuring optimal performance.
-
The choice of input and output capacitors depends on the specific application and frequency range. As a general rule, use low-ESR capacitors with a value of 10nF to 100nF for input capacitors and 100nF to 1uF for output capacitors. Consult the datasheet and application notes for more specific guidance.
-
The maximum power dissipation for the AD8607 is dependent on the package type and ambient temperature. For the ARMZ-R2 package, the maximum power dissipation is 1.4W at 25°C. To calculate power dissipation, use the formula Pd = (Vcc x Icc) + (Vout x Iout), where Vcc is the supply voltage, Icc is the quiescent current, Vout is the output voltage, and Iout is the output current.
-
Yes, the AD8607 can be used as a unity-gain buffer. However, it's essential to ensure that the input impedance is matched to the source impedance, and the output impedance is low enough to drive the load. Additionally, consider the noise and distortion performance, as well as the stability of the amplifier in this configuration.
-
To minimize EMI and RFI, use proper shielding, grounding, and layout techniques. Ensure that the AD8607 is placed away from noise sources, and use filtering and shielding to reduce electromagnetic interference. Consult the datasheet and application notes for more specific guidance on EMI and RFI mitigation.