Part Details for AD812AR-REEL7 by Analog Devices Inc
Results Overview of AD812AR-REEL7 by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
AD812AR-REEL7 Information
AD812AR-REEL7 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD812AR-REEL7
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 492 |
|
RFQ | ||
|
|
Quest Components | 340 |
|
$8.3136 / $11.6910 | Buy Now | |
|
|
Rochester Electronics | Video Amplifier, 2 Channel(s), 1 Func, Bipolar, PDSO8 RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 1895 |
|
$3.5800 / $4.4800 | Buy Now |
|
|
Win Source Electronics | IC OPAMP DUAL CURR-FDBK 8-SOIC | 15884 |
|
$7.1903 / $10.7854 | Buy Now |
Part Details for AD812AR-REEL7
AD812AR-REEL7 CAD Models
AD812AR-REEL7 Part Data Attributes
|
|
AD812AR-REEL7
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD812AR-REEL7
Analog Devices Inc
Dual, Current Feedback Low Power Op Amp
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | SOIC | |
| Package Description | SOIC-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | R-8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR, 7 INCH | |
| Peak Reflow Temperature (Cel) | 240 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 3.9 mm |
AD812AR-REEL7 Frequently Asked Questions (FAQ)
-
Analog Devices provides a recommended PCB layout in the AD812AR datasheet, which includes guidelines for component placement, routing, and grounding. Additionally, the AD812AR Evaluation Board can be used as a reference design.
-
The gain resistor values depend on the desired gain and bandwidth of the amplifier. Analog Devices provides a gain resistor calculator tool on their website, which can be used to determine the optimal resistor values based on the specific application requirements.
-
The maximum power dissipation of the AD812AR-REEL7 is 1.4W. To ensure it does not overheat, the device should be mounted on a PCB with a thermal pad, and the ambient temperature should be kept below 85°C. Additionally, the device should be operated within the recommended supply voltage range.
-
Yes, the AD812AR-REEL7 can be used in a single-supply configuration. However, the input common-mode voltage range is limited to VCC - 1.5V to VCC + 0.5V, and the output voltage swing is reduced. Additionally, the device may not be able to drive heavy loads in single-supply mode.
-
Analog Devices recommends using a low-pass filter at the input of the AD812AR-REEL7 to filter out high-frequency noise and aliasing. The filter should be designed to have a cutoff frequency below the Nyquist frequency of the system.