Part Details for ACPL-7900-000E by Broadcom Limited
Results Overview of ACPL-7900-000E by Broadcom Limited
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Space Technology
Aerospace and Defense
Transportation and Logistics
Renewable Energy
Automotive
Robotics and Drones
ACPL-7900-000E Information
ACPL-7900-000E by Broadcom Limited is an Isolation Amplifier.
Isolation Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| 7900901CA | Texas Instruments | Dual Differential Line Driver 14-CDIP -55 to 125 | |
| PCM3000E | Texas Instruments | Stereo CODEC with line-out (S/W Control) 28-SSOP | |
| PCM3000E/2K | Texas Instruments | Stereo CODEC with line-out (S/W Control) 28-SSOP |
Price & Stock for ACPL-7900-000E
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
516-2903-ND
|
DigiKey | IC OPAMP ISOLATION 1 CIRC 8DIP Min Qty: 1 Lead time: 14 Weeks Container: Tube |
786 In Stock |
|
$3.2508 / $6.4300 | Buy Now |
|
DISTI #
ACPL-7900-000E
|
Avnet Americas | Optocoupler, Optically Isolated Amplifiers, 1 Channel, DIP, 8 Pins, 5 kV, 200 kHz - Rail/Tube (Alt: ACPL-7900-000E) RoHS: Compliant Min Qty: 1250 Package Multiple: 50 Lead time: 14 Weeks, 0 Days Container: Tube | 0 |
|
$2.9664 / $3.0282 | Buy Now |
|
DISTI #
630-ACPL-7900-000E
|
Mouser Electronics | Optically Isolated Amplifiers Precision Iso-Amp RoHS: Compliant | 401 |
|
$3.0900 / $6.4300 | Buy Now |
|
DISTI #
ACPL-7900-000E
|
TME | Optocoupler, THT, Ch: 2, OUT: isolation amplifier, 500mV, DIP8 Min Qty: 1 | 805 |
|
$4.4100 / $5.1300 | Buy Now |
|
DISTI #
ACPL-7900-000E
|
EBV Elektronik | Optocoupler Optically Isolated Amplifiers 1 Channel DIP 8 Pins 5 kV 200 kHz (Alt: ACPL-7900-000E) RoHS: Compliant Min Qty: 50 Package Multiple: 50 Lead time: 16 Weeks, 0 Days | EBV - 650 |
|
Buy Now | |
|
|
Neutron USA | Optically Isolated Amplifiers Precision Iso-Amp | 50 |
|
$69.4300 | Buy Now |
Part Details for ACPL-7900-000E
ACPL-7900-000E CAD Models
ACPL-7900-000E Part Data Attributes
|
|
ACPL-7900-000E
Broadcom Limited
Buy Now
Datasheet
|
Compare Parts:
ACPL-7900-000E
Broadcom Limited
Isolation Amplifier, 1 Func, 200MHz Band Width, PDIP8, 0.300 INCH, ROHS COMPLIANT, DIP-8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | BROADCOM INC | |
| Package Description | 0.300 INCH, ROHS COMPLIANT, DIP-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Factory Lead Time | 14 Weeks | |
| Amplifier Type | ISOLATION AMPLIFIER | |
| Bandwidth (3dB)-Nom | 200 MHz | |
| Isolation Voltage-Min | 5000 V | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e3 | |
| Length | 9.8 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 105 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.7 mm | |
| Supply Current-Max | 18.5 mA | |
| Supply Voltage Limit-Max | 5.5 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | NO | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Voltage Gain-Max | 8.44 | |
| Voltage Gain-Min | 7.95 | |
| Width | 7.62 mm |
Alternate Parts for ACPL-7900-000E
This table gives cross-reference parts and alternative options found for ACPL-7900-000E. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ACPL-7900-000E, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AMC1200SDUB | Texas Instruments | $3.2570 | ±250-mV input, precision current sensing basic isolated amplifier 8-SOP -40 to 105 | ACPL-7900-000E vs AMC1200SDUB |
| ISO7221CHD | Texas Instruments | $80.7068 | High Temperature Dual Channel, 1/1, 25Mbps Digital Isolator 8-SOIC -55 to 175 | ACPL-7900-000E vs ISO7221CHD |
| HCPL-J784#500 | Broadcom Limited | Check for Price | Isolation Amplifier, 1 Func, 3750V Isolation-Min, 100MHz Band Width, PDSO8, SMT-8 | ACPL-7900-000E vs HCPL-J784#500 |
| HCPL-7800A#E | Avago Technologies | Check for Price | ISOLATION AMPLIFIER, 3750V ISOLATION-MIN, 100kHz BAND WIDTH, PDIP8, LEAD FREE, DIP-8 | ACPL-7900-000E vs HCPL-7800A#E |
| HCPL-7825OPTION300 | Avago Technologies | Check for Price | ISOLATION AMPLIFIER, 3750V ISOLATION-MIN, 200kHz BAND WIDTH, PDSO8 | ACPL-7900-000E vs HCPL-7825OPTION300 |
| HCPL-J784 | Hewlett Packard Co | Check for Price | Isolation Amplifier, 1 Func, 3750V Isolation-Min, 100MHz Band Width, PDIP8 | ACPL-7900-000E vs HCPL-J784 |
| HCPL7825#500 | Agilent Technologies Inc | Check for Price | Isolation Amplifier, 1 Func, 3750V Isolation-Min, 200MHz Band Width, CMOS, PDSO8, 0.300 INCH, SMT-8 | ACPL-7900-000E vs HCPL7825#500 |
| IL610-1E | NVE Corporation | Check for Price | Isolation Amplifier, 1 Func, PDSO8, ROHS COMPLIANT, MSOP-8 | ACPL-7900-000E vs IL610-1E |
| UPC1668C | California Eastern Laboratories (CEL) | Check for Price | Isolation Amplifier, 1 Func, BIPolar, CDIP8, PLASTIC, DIP-8 | ACPL-7900-000E vs UPC1668C |
| PS8551L4-V-E3-AX | Renesas Electronics Corporation | Check for Price | Isolation Amplifier Analog Output, , / | ACPL-7900-000E vs PS8551L4-V-E3-AX |
ACPL-7900-000E Frequently Asked Questions (FAQ)
-
A good PCB layout for the ACPL-7900-000E involves keeping the input and output circuits separate, using a ground plane, and minimizing the length of the signal traces. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
To ensure reliability in high-temperature applications, it's essential to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive material for the PCB, and keeping the device within its recommended operating temperature range.
-
The ACPL-7900-000E has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures during assembly and testing. This includes using an ESD wrist strap, ESD mat, and ESD-protected packaging.
-
Yes, the ACPL-7900-000E can be used in redundant or fault-tolerant systems. However, it's essential to ensure that the system is designed to handle the failure of one or more devices without compromising overall system reliability.
-
The recommended soldering and assembly procedures for the ACPL-7900-000E include using a soldering iron with a temperature range of 250°C to 260°C, a soldering time of 3-5 seconds, and a peak temperature of 240°C. It's also recommended to follow the manufacturer's guidelines for PCB assembly and reflow soldering.