Part Details for 905D1S09UA by Laser Components USA Inc
Results Overview of 905D1S09UA by Laser Components USA Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
905D1S09UA Information
905D1S09UA by Laser Components USA Inc is a Fiber Optic Emitter.
Fiber Optic Emitters are under the broader part category of Fiber Optics.
Fiber optics are thin glass strands used to transmit light signals over long distances, enabling high-speed data transfer. There are two main types—single mode and multimode fibers. Read more about Fiber Optics on our Fiber Optics part category page.
Price & Stock for 905D1S09UA
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
905D1S09UA
|
TME | Diode: laser, 895÷915nm, 19W, 12/20, THT, 6VDC, infrared Min Qty: 1 | 0 |
|
$22.0600 / $27.0800 | RFQ |
Part Details for 905D1S09UA
905D1S09UA CAD Models
905D1S09UA Part Data Attributes
|
|
905D1S09UA
Laser Components USA Inc
Buy Now
Datasheet
|
Compare Parts:
905D1S09UA
Laser Components USA Inc
Pulsed Laser Diode Emitter, 895nm Min, 915nm Max, Through Hole Mount, ROHS COMPLIANT, HERMETIC SEALED, PACKAGE-3
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | LASER COMPONENTS GMBH | |
| Reach Compliance Code | unknown | |
| Additional Feature | SEATED HT-CALCULATED | |
| Body Height | 3.85 mm | |
| Body Length or Diameter | 5.6 mm | |
| Fiber Optic Device Type | PULSED LASER DIODE EMITTER | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Operating Wavelength-Max | 915 nm | |
| Operating Wavelength-Min | 895 nm | |
| Operating Wavelength-Nom | 905 nm | |
| Spectral Width | 8 nm | |
| Surface Mount | NO | |
| Transmission Type | DIGITAL |
905D1S09UA Frequently Asked Questions (FAQ)
-
The recommended soldering temperature is 260°C (500°F) with a maximum soldering time of 10 seconds. It's essential to follow the manufacturer's soldering guidelines to prevent damage to the device.
-
Handle the device by the ceramic body only, avoiding touching the optical surface or electrical contacts. Store the device in a clean, dry environment, away from direct sunlight and moisture. Use an anti-static wrist strap or mat when handling the device to prevent electrostatic discharge (ESD) damage.
-
The recommended operating temperature range for the 905D1S09UA is -40°C to 85°C (-40°F to 185°F). Operating the device outside this range may affect its performance and reliability.
-
While the 905D1S09UA is designed to operate in a wide range of temperatures, it's not recommended for use in high-humidity environments (>80% RH) without proper protection. Moisture can affect the device's performance and reliability. Consider using a hermetically sealed package or applying a conformal coating to protect the device in humid environments.
-
The typical response time of the 905D1S09UA is around 1 ns. However, this value can vary depending on the specific application, circuit design, and operating conditions. Consult the manufacturer's application notes or contact their technical support for more information.