Part Details for 8302401FC by Avago Technologies
Results Overview of 8302401FC by Avago Technologies
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
8302401FC Information
8302401FC by Avago Technologies is an Optocoupler.
Optocoupler are under the broader part category of Optoelectronics.
Optoelectronic components work to detect, generate, and control light. They can essentially produce and/or react to light. Read more about Optoelectronics on our Optoelectronics part category page.
Price & Stock for 8302401FC
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | LOGIC IC OUTPUT OPTOCOUPLER, 4-ELEMENT, 1500V ISOLATION, 0.1MBPS | 2 |
|
$212.4806 | Buy Now |
Part Details for 8302401FC
8302401FC CAD Models
8302401FC Part Data Attributes
|
|
8302401FC
Avago Technologies
Buy Now
Datasheet
|
Compare Parts:
8302401FC
Avago Technologies
4 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 0.1Mbps, HERMETIC SEALED, DIP-16
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | AVAGO TECHNOLOGIES INC | |
| Package Description | HERMETIC SEALED, DIP-16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 3A001.A.2.C | |
| HTS Code | 8541.40.80.00 | |
| Samacsys Manufacturer | Avago Technologies | |
| Additional Feature | OPEN COLLECTOR, HIGH RELIABILITY | |
| Configuration | COMPLEX | |
| Data Rate-Nom | 0.1 MBps | |
| Forward Current-Max | 0.01 A | |
| Isolation Voltage-Max | 1500 V | |
| JESD-609 Code | e4 | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Number of Elements | 4 | |
| Number of Functions | 4 | |
| On-State Current-Max | 0.04 A | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Optoelectronic Device Type | LOGIC IC OUTPUT OPTOCOUPLER | |
| Power Dissipation-Max | 0.05 W | |
| Response Time-Nom | 0.000185 ns | |
| Supply Voltage-Min | 2 V | |
| Surface Mount | NO | |
| Terminal Finish | NICKEL GOLD |
Alternate Parts for 8302401FC
This table gives cross-reference parts and alternative options found for 8302401FC. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of 8302401FC, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 8302401FX | Agilent Technologies Inc | Check for Price | Logic IC Output Optocoupler, 4-Element, 1500V Isolation | 8302401FC vs 8302401FX |
| HCPL-6750 | Avago Technologies | Check for Price | 4 CHANNEL LOGIC OUTPUT OPTOCOUPLER | 8302401FC vs HCPL-6750 |
| HCPL-6751 | Hewlett Packard Co | Check for Price | Logic IC Output Optocoupler, 4-Element, 1500V Isolation, 0.1MBps, FP-16 | 8302401FC vs HCPL-6751 |
8302401FC Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a thermal pad connected to a heat sink is recommended. Ensure a minimum of 1mm clearance around the device for airflow and heat dissipation.
-
Use a 100-ohm differential impedance for the high-speed signals, and consider adding a common-mode filter or a shielded cable to minimize EMI. Also, ensure a solid ground plane and decouple the power supply with 0.1uF and 10uF capacitors.
-
Power up the device in the following sequence: VCC, then AVCC, and finally the clock signal. Ensure a minimum of 10ms delay between power-up and clock signal application. The reset signal should be asserted for at least 10ms during power-up.
-
Use a logic analyzer or oscilloscope to capture and analyze the signal waveforms. Check the device's status registers and error counters for any indication of errors. Consult the datasheet and application notes for specific troubleshooting guidelines.
-
Consult the datasheet and application notes for recommended register settings and configuration. The default settings may not be optimal for your specific application, so be sure to review and adjust as necessary.