Part Details for 7SE1-T by Honeywell Sensing and Control
Results Overview of 7SE1-T by Honeywell Sensing and Control
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
7SE1-T Information
7SE1-T by Honeywell Sensing and Control is a Snap Acting/Limit Switch.
Snap Acting/Limit Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for 7SE1-T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
7SE1-T-ND
|
DigiKey | SWITCH SNAP ACTION SPDT 5A 250V Min Qty: 10 Lead time: 18 Weeks Container: Bulk | Temporarily Out of Stock |
|
$165.6770 | Buy Now |
|
DISTI #
785-7SE1-T
|
Mouser Electronics | Basic / Snap Action Switches Sealed SE/SLD MIN SW RoHS: Not Compliant | 0 |
|
$154.4500 / $155.4100 | Order Now |
|
|
Master Electronics | MICRO SWITCH™ Miniature Environmentally Sealed Basic Switches: SE Series, Single Pole Double Throw (SPDT), 5 A at 250 Vac, Stainless Steel Pin Plunger, Lower Operating Force: 113 to 227 gf [4 to 8 oz], Solder-Plated Terminals, -53 °C to 105 °C [-65 °F to 221 °F] RoHS: Compliant | 0 |
|
$140.3900 / $261.3900 | Buy Now |
Part Details for 7SE1-T
7SE1-T CAD Models
7SE1-T Part Data Attributes
|
|
7SE1-T
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
7SE1-T
Honeywell Sensing and Control
Snap Acting/Limit Switch, SPDT, Momentary, 5A, 30VDC, 1.35mm, Screw Terminal, Plunger Actuator, Panel Mount
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.70.00 | |
| Actuator Travel | 1.35 mm | |
| Actuator Type | PLUNGER | |
| Body Breadth | 8.79 mm | |
| Body Height | 19.05 mm | |
| Body Length or Diameter | 22.25 mm | |
| Contact (AC) Max Rating R Load | 5A@250VAC | |
| Contact Current(AC)-Max | 5 A | |
| Contact Current(DC)-Max | 5 A | |
| Contact (DC) Max Rating R Load | 5A@30VDC | |
| Contact Voltage(AC)-Max | 250 V | |
| Contact Voltage(DC)-Max | 30 V | |
| Mounting Feature | PANEL MOUNT | |
| Operating Force-Max | 2.22 N | |
| Pre-Travel-Max | 1.27 mm | |
| Sealing | CORROSION PROOF | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPDT | |
| Switch Type | SNAP ACTING/LIMIT SWITCH | |
| Termination Type | SCREW |
7SE1-T Frequently Asked Questions (FAQ)
-
The recommended torque for the screw terminals is 0.5 Nm to 1.5 Nm (0.37 lb-in to 1.06 lb-in).
-
The 7SE1-T is not designed for use in hazardous locations. It does not have any certifications for explosive atmospheres or intrinsic safety.
-
The maximum wire size that can be used with the screw terminals is 2.5 mm² (AWG 14).
-
The 7SE1-T is designed to withstand moderate vibration levels. However, it is not recommended for use in extremely high-vibration environments. Consult the datasheet for specific vibration limits.
-
Yes, the 7SE1-T is compatible with PLCs from other manufacturers, as long as they support the standard analog output signals (e.g., 0-10 V, 4-20 mA).