Part Details for 74HC595D,112 by NXP Semiconductors
Results Overview of 74HC595D,112 by NXP Semiconductors
- Distributor Offerings: (7 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
74HC595D,112 Information
74HC595D,112 by NXP Semiconductors is a Shift Register.
Shift Registers are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| 74HC595D | Toshiba Electronic Devices & Storage Corporation | CMOS Logic IC, 8-bit Shift Register, SOIC16, -40 to 125 degC |
Price & Stock for 74HC595D,112
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
70012196
|
RS | 8-Bit Shift Register w/Output Latch Min Qty: 1 Package Multiple: 1 Container: Bulk | 0 |
|
$0.1400 / $0.2200 | RFQ |
|
|
Bristol Electronics | 797 |
|
RFQ | ||
|
|
Bristol Electronics | 50 |
|
RFQ | ||
|
|
Bristol Electronics | 35 |
|
RFQ | ||
|
|
Quest Components | SERIAL IN PARALLEL OUT, HC/UH SERIES, 8-BIT, RIGHT DIRECTION, TRUE OUTPUT, CMOS, PDSO16 | 11 |
|
$0.3900 | Buy Now |
|
|
Rochester Electronics | Serial In Parallel Out, HC/UH Series, 8-Bit, Right Direction, True Output, CMOS, PDSO16 RoHS: Compliant Status: Obsolete Min Qty: 1 | 1000 |
|
$0.0908 / $0.1465 | Buy Now |
|
|
Vyrian | Logic ICs | 4826 |
|
RFQ |
Part Details for 74HC595D,112
74HC595D,112 CAD Models
74HC595D,112 Part Data Attributes
|
|
74HC595D,112
NXP Semiconductors
Buy Now
Datasheet
|
Compare Parts:
74HC595D,112
NXP Semiconductors
74HC(T)595 - 8-bit serial-in, serial or parallel-out shift register with output latches; 3-state SOP 16-Pin
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | NXP SEMICONDUCTORS | |
| Part Package Code | SOP | |
| Package Description | 3.90 MM, PLASTIC, MS-012, SOT-109-1, SOP-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | SOT109-1 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | SERIAL STANDARD OUTPUT FOR CASCADING | |
| Count Direction | RIGHT | |
| Family | HC/UH | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e4 | |
| Length | 9.9 mm | |
| Load Capacitance (CL) | 50 pF | |
| Logic IC Type | SERIAL IN PARALLEL OUT | |
| Max Frequency@Nom-Sup | 20000000 Hz | |
| Moisture Sensitivity Level | 1 | |
| Number of Bits | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | 3-STATE | |
| Output Polarity | TRUE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Propagation Delay (tpd) | 265 ns | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 6 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Trigger Type | POSITIVE EDGE | |
| Width | 3.9 mm | |
| fmax-Min | 24 MHz |
Alternate Parts for 74HC595D,112
This table gives cross-reference parts and alternative options found for 74HC595D,112. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of 74HC595D,112, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 74HC594D,118 | Nexperia | $0.3478 | 74HC(T)594 - 8-bit shift register with output register@en-us SOP 16-Pin | 74HC595D,112 vs 74HC594D,118 |
| 74HC594D | Nexperia | Check for Price | Serial In Parallel Out, HC/UH Series, 8-Bit, Right Direction, True Output, CMOS, PDSO16 | 74HC595D,112 vs 74HC594D |
| 74HC595D-Q100,118 | NXP Semiconductors | Check for Price | 74HC(T)595-Q100 - 8-bit serial-in, serial or parallel-out shift register with output latches; 3-state SOP 16-Pin | 74HC595D,112 vs 74HC595D-Q100,118 |
| 935009160118 | Nexperia | Check for Price | Serial In Parallel Out, HC/UH Series, 8-Bit, Right Direction, True Output, CMOS, PDSO16 | 74HC595D,112 vs 935009160118 |
| 74HC595D-Q100 | NXP Semiconductors | Check for Price | HC/UH SERIES, 8-BIT RIGHT SERIAL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT, PDSO16, 3.90 MM, PLASTIC, MS-012, SOT109-1, SOP-16 | 74HC595D,112 vs 74HC595D-Q100 |
| 74HC595D | Philips Semiconductors | Check for Price | Shift Register, 8-Bit, CMOS, PDSO16, | 74HC595D,112 vs 74HC595D |
| 74HC594D-T | Philips Semiconductors | Check for Price | Shift Register, 8-Bit, CMOS, PDSO16, | 74HC595D,112 vs 74HC594D-T |
74HC595D,112 Frequently Asked Questions (FAQ)
-
The maximum clock frequency for the 74HC595D is 25 MHz.
-
Yes, the 74HC595D can be used as a level shifter, but it's not recommended as it's not designed for that purpose. It's primarily a serial-in, parallel-out shift register.
-
To ensure reliable data transfer, make sure to use a clock frequency within the recommended range, use a stable clock signal, and ensure that the data is clocked in and out of the shift register correctly.
-
The maximum current rating for the output pins of the 74HC595D is 25 mA per pin.
-
Yes, the 74HC595D is 5V tolerant, so it can be used with a 5V microcontroller and 3.3V peripherals, but ensure that the output voltage of the microcontroller is within the recommended range of the 74HC595D.