Part Details for 74HC373PW by NXP Semiconductors
Results Overview of 74HC373PW by NXP Semiconductors
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
74HC373PW Information
74HC373PW by NXP Semiconductors is a Bus Driver/Transceiver.
Bus Driver/Transceivers are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Price & Stock for 74HC373PW
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | BUS DRIVER, HC/UH SERIES, 1-FUNC, 8-BIT, TRUE OUTPUT, CMOS, PDSO20 | 22541 |
|
$0.1563 / $0.5210 | Buy Now |
|
|
Ameya Holding Limited | IC: digital, 3-state,octal,D-latch transparent, Channels: 8, SMD | 150 |
|
RFQ | |
|
|
ComSIT USA | OCTAL D-TYPE TRANSPARENT LATCH, 3-STATE Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 ECCN: EAR99 RoHS: Compliant |
|
|
RFQ |
Part Details for 74HC373PW
74HC373PW CAD Models
74HC373PW Part Data Attributes
|
|
74HC373PW
NXP Semiconductors
Buy Now
Datasheet
|
Compare Parts:
74HC373PW
NXP Semiconductors
HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 4.40 MM, PLASTIC, MO-153, SOT-360-1, TSSOP-20
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | NXP SEMICONDUCTORS | |
| Part Package Code | TSSOP | |
| Package Description | 4.40 MM, PLASTIC, MO-153, SOT-360-1, TSSOP-20 | |
| Pin Count | 20 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Family | HC/UH | |
| JESD-30 Code | R-PDSO-G20 | |
| JESD-609 Code | e4 | |
| Length | 6.5 mm | |
| Load Capacitance (CL) | 50 pF | |
| Logic IC Type | BUS DRIVER | |
| Max I(ol) | 0.006 A | |
| Moisture Sensitivity Level | 1 | |
| Number of Bits | 8 | |
| Number of Functions | 1 | |
| Number of Ports | 2 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | 3-STATE | |
| Output Polarity | TRUE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP20,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TUBE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Prop. Delay@Nom-Sup | 45 ns | |
| Propagation Delay (tpd) | 265 ns | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Supply Voltage-Max (Vsup) | 6 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 4.4 mm |
Alternate Parts for 74HC373PW
This table gives cross-reference parts and alternative options found for 74HC373PW. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of 74HC373PW, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SN74HC373PWR | Texas Instruments | $0.1458 | Octal Transparent D-Type Latches With 3-State Outputs 20-TSSOP -40 to 85 | 74HC373PW vs SN74HC373PWR |
| SN74HC373PW | Texas Instruments | $0.1905 | Octal Transparent D-Type Latches With 3-State Outputs 20-TSSOP -40 to 85 | 74HC373PW vs SN74HC373PW |
| SN74HC373PWG4 | Texas Instruments | Check for Price | Octal Transparent D-Type Latches With 3-State Outputs 20-TSSOP -40 to 85 | 74HC373PW vs SN74HC373PWG4 |
| 74HC373PW-T | NXP Semiconductors | Check for Price | HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 4.40 MM, PLASTIC, MO-153, SOT-360-1, TSSOP-20 | 74HC373PW vs 74HC373PW-T |
| HD74HC373T | Renesas Electronics Corporation | Check for Price | HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, TTP-20DA | 74HC373PW vs HD74HC373T |
| 74HC373PW/T3 | NXP Semiconductors | Check for Price | HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 4.40 MM, PLASTIC, MO-153, SOT-360-1, TSSOP-20 | 74HC373PW vs 74HC373PW/T3 |
| 74HC373PW-Q100 | NXP Semiconductors | Check for Price | HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 4.40 MM, PLASTIC, MO-153, SOT360-1, TSSOP-20 | 74HC373PW vs 74HC373PW-Q100 |
74HC373PW Frequently Asked Questions (FAQ)
-
The maximum frequency of operation for the 74HC373PW is 40 MHz, but it can vary depending on the operating voltage and load conditions.
-
To ensure that the outputs are not corrupted during power-up or power-down, it is recommended to use an external pull-up or pull-down resistor on the OE (Output Enable) pin to keep the outputs in a defined state.
-
Yes, the 74HC373PW can be used as a level shifter, but it is not recommended as it is not designed for this purpose. The device is intended for use as an octal transparent latch, and using it as a level shifter may not provide the desired performance or reliability.
-
The maximum current that can be sourced or sunk by the outputs of the 74HC373PW is 25 mA, but it is recommended to limit the current to 10 mA or less to ensure reliable operation.
-
During asynchronous operation, the latch enable (LE) pin should be tied to a logic high or low level to prevent unwanted latching of the data. If the LE pin is left floating, it may cause unpredictable behavior.