Part Details for 26PCBFB2G by Honeywell Sensing and Control
Results Overview of 26PCBFB2G by Honeywell Sensing and Control
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Security and Surveillance
Environmental Monitoring
Internet of Things (IoT)
Space Technology
Smart Cities
Aerospace and Defense
Healthcare
Agriculture Technology
Virtual Reality (VR), Augmented Reality (AR), and Vision Systems
Medical Imaging
Robotics and Drones
26PCBFB2G Information
26PCBFB2G by Honeywell Sensing and Control is a Pressure Sensor.
Pressure Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Price & Stock for 26PCBFB2G
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
480-2848-ND
|
DigiKey | SENSOR 5PSIC 0.18" .05V Lead time: 6 Weeks Container: Bulk | Temporarily Out of Stock |
|
Buy Now | |
|
DISTI #
63057055
|
Verical | Pressure Sensor 0V to 0.05V 0psi to 5psi Gage 4-Pin RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 2234 | Americas - 204 |
|
$76.6782 / $116.6876 | Buy Now |
|
|
Bristol Electronics | 8 |
|
RFQ | ||
|
DISTI #
26PCBFB2G
|
TME | Sensor: pressure, -5÷5psi, gage, OUT: analogue, Usup: 10VDC, DIP4 Min Qty: 25 | 0 |
|
$34.3500 | RFQ |
|
|
Master Electronics | Honeywell Miniature Low Pressure Sensors: 26PC Series, Compensated/Unamplified, 5 psi Pressure Range, Fluorosilicone Seal, Barbed Port, 2 x 2 DIP, Normal Polarity Output, Gage Pressure Measurement Type RoHS: Compliant |
204 In Stock |
|
$64.2700 / $93.0000 | Buy Now |
|
|
Neutron USA | Board Mt Pressure Sensor Comp/Unamp, 0-5psi G, fluosilic Sing ax barb 2 x 2 DIP, Vout: 0-50mV (10V), Accur: ±0.5%, Resp t: 1ms, Vs: 2.5-16V, Op: -40~85°C | 50 |
|
$181.8100 | Buy Now |
Part Details for 26PCBFB2G
26PCBFB2G CAD Models
26PCBFB2G Part Data Attributes
|
|
26PCBFB2G
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
26PCBFB2G
Honeywell Sensing and Control
Peizoresistive Sensor, Gage, 0Psi Min, 5Psi Max, 0-50mV, Rectangular, Through Hole Mount
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Reach Compliance Code | unknown | |
| Linearity (%) | 0.5 % | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Offset-Nom | 0MV | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Interface Type | 4-WIRE INTERFACE | |
| Output Range | 0-50mV | |
| Output Type | ANALOG VOLTAGE | |
| Package Shape/Style | RECTANGULAR | |
| Port Type | BARBED | |
| Pressure Range-Max | 5 Psi | |
| Pressure Range-Min | ||
| Pressure Sensing Mode | GAGE | |
| Response Time | 1000 µs | |
| Sensors/Transducers Type | PRESSURE SENSOR,PIEZORESISTIVE | |
| Supply Voltage-Max | 16 V | |
| Supply Voltage-Min | 10 V | |
| Surface Mount | NO | |
| Termination Type | SOLDER |
26PCBFB2G Frequently Asked Questions (FAQ)
-
The recommended mounting orientation for the 26PCBFB2G is with the sensor axis vertical and the connector down. This orientation helps to prevent moisture from entering the sensor.
-
The 26PCBFB2G is factory-calibrated and does not require additional calibration. However, if you need to recalibrate the sensor, you can use a pressure source and a calibrated reference sensor to adjust the output signal.
-
The response time of the 26PCBFB2G is typically less than 1 ms, making it suitable for applications that require fast pressure measurements.
-
Yes, the 26PCBFB2G is designed to operate in harsh environments, including high temperatures, humidity, and vibration. However, it's essential to follow the recommended installation and mounting procedures to ensure reliable operation.
-
The power consumption of the 26PCBFB2G is typically around 10 mA, making it suitable for battery-powered applications.