Part Details for 21SX39-T2 by Honeywell Sensing and Control
Results Overview of 21SX39-T2 by Honeywell Sensing and Control
- Distributor Offerings: (11 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
21SX39-T2 Information
21SX39-T2 by Honeywell Sensing and Control is a Snap Acting/Limit Switch.
Snap Acting/Limit Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for 21SX39-T2
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
23F2185
|
Newark | Microswitch, Pin Plunger, Spdt, 7A 250V, Microswitch Type:Subminiature, Microswitch Actuator:Pin Plunger, Contact Configuration:Spdt, Switch Terminals:Solder, Contact Current Max:7A, Contact Voltage Dc Nom:28Vdc, Release Force:1Ozf Rohs Compliant: Yes |Honeywell 21SX39-T2 RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 30 |
|
$13.2300 / $23.0300 | Buy Now |
DISTI #
480-3017-ND
|
DigiKey | SWITCH SNAP ACTION SPDT 7A 115V Min Qty: 200 Lead time: 4 Weeks Container: Bulk | Temporarily Out of Stock |
|
$11.1188 | Buy Now |
DISTI #
785-21SX39-T2
|
Mouser Electronics | Basic / Snap Action Switches 7A PIN PLNGR WIRE WR RoHS: Compliant | 0 |
|
$11.1100 / $23.0300 | Order Now |
DISTI #
71145835
|
RS | Subminiature Basics Min Qty: 200 Package Multiple: 1 Lead time: 7 Weeks, 0 Days Container: Bulk | 0 |
|
$16.3200 / $21.2000 | RFQ |
|
Bisco Industries | 5 |
|
Buy Now | ||
DISTI #
69805894
|
Verical | Switch Snap Action N.O./N.C. SPDT Pin Plunger 7A 115VAC 28VDC 1.39N Screw Mount Solder RoHS: Compliant Min Qty: 10 Package Multiple: 10 Date Code: 2334 | Americas - 2040 |
|
$15.0020 / $18.7590 | Buy Now |
DISTI #
21SX39-T2
|
TTI | Basic / Snap Action Switches 7A PIN PLNGR WIRE WR Min Qty: 1 Package Multiple: 1 Container: Bulk |
Americas - 148 In Stock |
|
$11.7900 / $17.5200 | Buy Now |
DISTI #
SS30AT41-183
|
TTI | Basic / Snap Action Switches SWITCH BASIC MS24547-4 Min Qty: 200 Package Multiple: 1 Container: Bulk | Americas - 0 |
|
$11.9400 / $12.4200 | Buy Now |
|
Powell Electronics | Subminiature Basic Switch Min Qty: 1 | 976 |
|
$11.0900 / $17.3300 | Buy Now |
DISTI #
21SX39-T2
|
FDH Electronics | Switches Min Qty: 1 | 236 |
|
$11.4360 / $17.7890 | Buy Now RFQ |
Part Details for 21SX39-T2
21SX39-T2 CAD Models
21SX39-T2 Part Data Attributes
|
21SX39-T2
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
21SX39-T2
Honeywell Sensing and Control
Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 0.6mm, Wire Terminal, Plastic Plunger Actuator, Panel Mount,
|
Pbfree Code | Yes | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
HTS Code | 8536.50.70.00 | |
Actuator Travel | 0.6 mm | |
Actuator Type | PLASTIC PLUNGER | |
Body Breadth | 5.08 mm | |
Body Height | 8.89 mm | |
Body Length or Diameter | 12.7 mm | |
Contact (AC) Max Rating R Load | 7A@250VAC | |
Contact Current(AC)-Max | 7 A | |
Contact Current(DC)-Max | 7 A | |
Contact (DC) Max Rating R Load | 7A@28VDC | |
Contact Voltage(AC)-Max | 250 V | |
Contact Voltage(DC)-Max | 28 V | |
JESD-609 Code | e4 | |
Mounting Feature | PANEL MOUNT | |
Operating Force-Max | 1.39 N | |
Operating Temperature-Max | 85 °C | |
Pre-Travel-Max | 0.51 mm | |
Surface Mount | NO | |
Switch Action | MOMENTARY | |
Switch Function | SPDT | |
Switch Type | SNAP ACTING/LIMIT SWITCH | |
Terminal Finish | Gold (Au) | |
Termination Type | WIRE |
Alternate Parts for 21SX39-T2
This table gives cross-reference parts and alternative options found for 21SX39-T2. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of 21SX39-T2, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
21SX88 | Honeywell Sensing and Control | $28.7300 | Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 0.6mm, Solder Terminal, Plastic Plunger Actuator, Panel Mount, | 21SX39-T2 vs 21SX88 |
1SX81 | Honeywell Sensing and Control | $30.8854 | Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 0.6mm, Solder Terminal, Plastic Plunger Actuator, Through Hole-right Angle | 21SX39-T2 vs 1SX81 |
1SX89-T2 | Honeywell Sensing and Control | Check for Price | Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 0.6mm, Wire Terminal, Plastic Plunger Actuator, Panel Mount | 21SX39-T2 vs 1SX89-T2 |
21SX1-T | Honeywell Sensing and Control | Check for Price | Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 0.6mm, Wire Terminal, Plastic Plunger Actuator, Panel Mount, | 21SX39-T2 vs 21SX1-T |
21SX39-H58 | Honeywell Sensing and Control | Check for Price | Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 0.6mm, Wire Terminal, Plastic Plunger Actuator, Panel Mount, | 21SX39-T2 vs 21SX39-H58 |
1SX1-T2 | Honeywell Sensing and Control / MICRO SWITCH | Check for Price | Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 0.61mm, Solder Terminal, Plastic Plunger Actuator, Panel Mount | 21SX39-T2 vs 1SX1-T2 |
21SX39-T2 Frequently Asked Questions (FAQ)
-
The recommended mounting orientation is with the sensor axis vertical and the connector down. This orientation helps to prevent moisture from entering the sensor.
-
To minimize EMI/RFI interference, use a shielded cable, keep the sensor away from high-frequency sources, and use a ferrite bead or EMI filter on the signal lines.
-
The maximum recommended cable length is 10 meters (33 feet) to minimize signal attenuation and noise pickup.
-
No, the 21SX39-T2 is not designed for use in vacuum or high-pressure environments. It is intended for use in ambient atmospheric conditions.
-
The 21SX39-T2 is factory-calibrated and does not require user calibration. However, if you need to perform a system-level calibration, consult the datasheet and application notes for guidance.