Part Details for 1SMB6.0AT3 by Motorola Mobility LLC
Results Overview of 1SMB6.0AT3 by Motorola Mobility LLC
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Space Technology
Aerospace and Defense
Energy and Power Systems
Renewable Energy
1SMB6.0AT3 Information
1SMB6.0AT3 by Motorola Mobility LLC is a Transient Suppressor.
Transient Suppressors are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Part Details for 1SMB6.0AT3
1SMB6.0AT3 CAD Models
1SMB6.0AT3 Part Data Attributes
|
|
1SMB6.0AT3
Motorola Mobility LLC
Buy Now
Datasheet
|
Compare Parts:
1SMB6.0AT3
Motorola Mobility LLC
600W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC,CASE 403A, 2 PIN
|
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MOTOROLA INC | |
| Package Description | R-PDSO-C2 | |
| Pin Count | 2 | |
| Manufacturer Package Code | CASE 403A | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.50 | |
| Additional Feature | HIGH RELIABILITY, LOW IMPEDANCE | |
| Breakdown Voltage-Min | 6.67 V | |
| Clamping Voltage-Max | 10.3 V | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | |
| JESD-30 Code | R-PDSO-C2 | |
| JESD-609 Code | e0 | |
| Non-rep Peak Rev Power Dis-Max | 600 W | |
| Number of Elements | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -65 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Polarity | UNIDIRECTIONAL | |
| Qualification Status | Not Qualified | |
| Reference Standard | UL RECOGNIZED | |
| Rep Pk Reverse Voltage-Max | 6 V | |
| Reverse Current-Max | 800 µA | |
| Surface Mount | YES | |
| Technology | AVALANCHE | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | C BEND | |
| Terminal Position | DUAL |
Alternate Parts for 1SMB6.0AT3
This table gives cross-reference parts and alternative options found for 1SMB6.0AT3. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of 1SMB6.0AT3, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SMBJ6.0AHE3/5B | Vishay Semiconductors | Check for Price | DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN, Transient Suppressor | 1SMB6.0AT3 vs SMBJ6.0AHE3/5B |
1SMB6.0AT3 Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the 1SMB6.0AT3 is -55°C to 150°C.
-
Yes, the 1SMB6.0AT3 is designed for high-reliability applications and is qualified to MIL-PRF-19500/492 standards.
-
The typical response time of the 1SMB6.0AT3 is less than 1 ns.
-
Yes, multiple 1SMB6.0AT3 devices can be used in parallel to increase power handling, but careful attention must be paid to thermal management and current sharing.
-
Yes, the 1SMB6.0AT3 is RoHS compliant and meets the requirements of the European Union's Restriction of Hazardous Substances directive.