Part Details for 1SE2-6 by Honeywell Sensing and Control
Results Overview of 1SE2-6 by Honeywell Sensing and Control
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
1SE2-6 Information
1SE2-6 by Honeywell Sensing and Control is a Snap Acting/Limit Switch.
Snap Acting/Limit Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for 1SE2-6
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
785-1SE2-6
|
Mouser Electronics | Basic / Snap Action Switches BASIC SW 5A 30VDC 250VAC PLGR WIRE LD RoHS: Not Compliant | 80 |
|
$160.3600 / $161.4000 | Buy Now |
|
DISTI #
1SE2-6
|
TTI | Basic / Snap Action Switches BASIC SW 5A 30VDC 250VAC PLGR WIRE LD Min Qty: 10 Package Multiple: 1 Container: Box | Americas - 0 |
|
$134.4100 / $150.5700 | Buy Now |
|
|
Master Electronics | MICRO SWITCH™ Miniature Environmentally Sealed Basic Switches: SE Series, Single Pole Normally Closed (SPNC), 5 A at 250 Vac, Stainless Steel Pin Plunger, (2) 1829 mm [72 in] Lead Wire Termination (20 Gage), -53 °C to 105 °C [-65 °F to 221 °F] Temperature Range RoHS: Compliant | 0 |
|
$196.1100 / $230.2700 | Buy Now |
Part Details for 1SE2-6
1SE2-6 CAD Models
1SE2-6 Part Data Attributes
|
|
1SE2-6
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
1SE2-6
Honeywell Sensing and Control
Snap Acting/Limit Switch, SPST, Momentary, 5A, 30VDC, 1.35mm, Wire Terminal, Steel Plunger Actuator, Panel Mount,
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.70.00 | |
| Actuator Travel | 1.35 mm | |
| Actuator Type | STEEL PLUNGER | |
| Body Breadth | 8.79 mm | |
| Body Height | 15.24 mm | |
| Body Length or Diameter | 22.25 mm | |
| Contact (AC) Max Rating R Load | 5A@250VAC | |
| Contact Current(AC)-Max | 5 A | |
| Contact Current(DC)-Max | 5 A | |
| Contact (DC) Max Rating R Load | 5A@30VDC | |
| Contact Voltage(AC)-Max | 250 V | |
| Contact Voltage(DC)-Max | 30 V | |
| Mounting Feature | PANEL MOUNT | |
| Operating Force-Max | 4.73 N | |
| Pre-Travel-Max | 1.27 mm | |
| Sealing | CORROSION PROOF; EPOXY TERMINAL SEALED | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPST | |
| Switch Type | SNAP ACTING/LIMIT SWITCH | |
| Termination Type | WIRE |
1SE2-6 Frequently Asked Questions (FAQ)
-
The recommended mounting orientation for the 1SE2-6 is with the sensor axis vertical and the connector pointing downwards to prevent moisture from entering the sensor.
-
The 1SE2-6 does not require calibration. It is factory-calibrated and ready to use out of the box. However, it's recommended to perform a system-level calibration to ensure accurate readings in your specific application.
-
The response time of the 1SE2-6 is typically around 10-15 ms, but this can vary depending on the specific application and environmental conditions.
-
Yes, the 1SE2-6 is designed to operate in high-vibration environments and can withstand vibrations up to 10 g. However, it's recommended to consult with Honeywell's application engineers to ensure the sensor is properly mounted and secured.
-
The 1SE2-6 has an analog output, which can be easily interfaced with most communication protocols, including analog-to-digital converters, microcontrollers, and PLCs. However, it's recommended to consult with Honeywell's application engineers to ensure compatibility with your specific protocol.