Part Details for 1N6105AUS by Semtech Corporation
Results Overview of 1N6105AUS by Semtech Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Space Technology
Aerospace and Defense
1N6105AUS Information
1N6105AUS by Semtech Corporation is a Transient Suppressor.
Transient Suppressors are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for 1N6105AUS
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
1N6105AUSS-ND
|
DigiKey | TVS DIODE 5.7VWM 11.2VC Lead time: 15 Weeks Container: Bulk | Limited Supply - Call |
|
Buy Now | |
|
DISTI #
1N6105AUS
|
Avnet Americas | - Bulk (Alt: 1N6105AUS) RoHS: Not Compliant Min Qty: 250 Package Multiple: 1 Lead time: 24 Weeks, 0 Days Container: Bulk | 0 |
|
RFQ |
Part Details for 1N6105AUS
1N6105AUS CAD Models
1N6105AUS Part Data Attributes
|
|
1N6105AUS
Semtech Corporation
Buy Now
Datasheet
|
Compare Parts:
1N6105AUS
Semtech Corporation
Trans Voltage Suppressor Diode, 500W, 6.9V V(RWM), Unidirectional, 1 Element, Silicon, HERMETIC SEALED, SURFACE MOUNT PACKAGE-2
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | SEMTECH CORP | |
| Package Description | HERMETIC SEALED, SURFACE MOUNT PACKAGE-2 | |
| Pin Count | 2 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.50 | |
| Factory Lead Time | 24 Weeks | |
| Additional Feature | METALLURGICALLY BONDED | |
| Breakdown Voltage-Min | 8.65 V | |
| Breakdown Voltage-Nom | 8.65 V | |
| Case Connection | ISOLATED | |
| Clamping Voltage-Max | 13.4 V | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | |
| JESD-30 Code | O-XELF-N2 | |
| JESD-609 Code | e0 | |
| Non-rep Peak Rev Power Dis-Max | 500 W | |
| Number of Elements | 1 | |
| Number of Terminals | 2 | |
| Package Body Material | UNSPECIFIED | |
| Package Shape | ROUND | |
| Package Style | LONG FORM | |
| Polarity | UNIDIRECTIONAL | |
| Power Dissipation-Max | 1.5 W | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 6.9 V | |
| Surface Mount | YES | |
| Technology | ZENER | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | NO LEAD | |
| Terminal Position | END |
Alternate Parts for 1N6105AUS
This table gives cross-reference parts and alternative options found for 1N6105AUS. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of 1N6105AUS, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 1N6105AUS | Microsemi Corporation | Check for Price | Trans Voltage Suppressor Diode, 500W, 6.9V V(RWM), Bidirectional, 1 Element, Silicon, HERMETIC SEALED, GLASS, D-5B, E-MELF-2 | 1N6105AUS vs 1N6105AUS |
| 1N6105AUSE3 | Microsemi Corporation | Check for Price | Trans Voltage Suppressor Diode, 6.9V V(RWM), Bidirectional, | 1N6105AUS vs 1N6105AUSE3 |
1N6105AUS Frequently Asked Questions (FAQ)
-
A good PCB layout for the 1N6105AUS should minimize lead inductance, ensure good heat sinking, and keep the input and output traces separate to reduce noise coupling. A 4-layer PCB with a solid ground plane is recommended. The datasheet provides a recommended PCB layout, but it's essential to consult with experienced engineers or PCB design experts for optimal results.
-
To ensure proper biasing, follow the recommended biasing circuit in the datasheet. The 1N6105AUS requires a stable voltage supply, and the bias resistors should be chosen to provide the recommended voltage and current. Additionally, ensure that the input signal is within the recommended range, and the output is properly terminated to avoid reflections.
-
The 1N6105AUS is rated for operation from -40°C to +125°C. However, it's essential to consider the derating curves provided in the datasheet to ensure the device operates within its recommended specifications over the entire temperature range.
-
To troubleshoot issues with the 1N6105AUS, start by verifying the PCB layout, biasing, and input/output connections. Check for any signs of overheating, and ensure the device is properly soldered. Use oscilloscopes or spectrum analyzers to measure the input and output signals, and consult the datasheet and application notes for guidance on troubleshooting common issues.
-
Yes, the 1N6105AUS can be used in switching power supply applications, but it's essential to ensure the device is properly biased and the input signal is within the recommended range. The 1N6105AUS is designed for high-frequency switching applications, but it's crucial to follow the recommended design guidelines and consider the device's power handling capabilities.