Part Details for 111SM1-T2 by Honeywell Sensing and Control
Results Overview of 111SM1-T2 by Honeywell Sensing and Control
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
111SM1-T2 Information
111SM1-T2 by Honeywell Sensing and Control is a Snap Acting/Limit Switch.
Snap Acting/Limit Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for 111SM1-T2
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
50B5569
|
Newark | Submin Basic Switch, pinplunger, spdt, 5A, 250V, Microswitch Type:Subminiature, Microswitch Actuator:Leaf Lever, Contact Configuration:Spdt, Switch Terminals:Solder, Contact Current Max:5A, Contact Voltage Dc Nom:-, Product Range:- Rohs Compliant: Yes |Honeywell 111SM1-T2 RoHS: Compliant Min Qty: 200 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
$13.4400 / $13.9100 | Buy Now |
|
DISTI #
480-6925-ND
|
DigiKey | SWITCH SNAP ACTION SPDT 5A 250V Min Qty: 200 Lead time: 17 Weeks Container: Bulk | Temporarily Out of Stock |
|
$13.4489 | Buy Now |
|
DISTI #
785-111SM1-T2
|
Mouser Electronics | Basic / Snap Action Switches SPDT LEAF LEVER SCR 5A 30VDC BASIC SW RoHS: Compliant | 78 |
|
$13.4400 / $21.5000 | Buy Now |
|
DISTI #
111SM1-T2
|
TTI | Basic / Snap Action Switches SPDT LEAF LEVER SCR 5A 30VDC BASIC SW Min Qty: 1 Package Multiple: 1 Container: Bulk | Americas - 0 |
|
$15.3300 / $17.2700 | Buy Now |
|
|
Master Electronics | MICRO SWITCH™ Subminiature Basic Switches: SM Series, Single Pole Double Throw (SPDT), 5 A 250 Vac, 1,95 N [7.0 oz] Maximum Operating Force, 4,83 mm [0.19 in] Integral Flexible Leaf with Straight Lever Actuator, Double Turret Solder Termination, 9,5 mm [0.38 in] Mounting Centers, UL, CE, CSA, ENEC RoHS: Compliant |
1243 On Order |
|
$12.9800 / $23.8900 | Buy Now |
Part Details for 111SM1-T2
111SM1-T2 CAD Models
111SM1-T2 Part Data Attributes
|
|
111SM1-T2
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
111SM1-T2
Honeywell Sensing and Control
Snap Acting/Limit Switch, SPDT, Momentary, 5.588mm, Screw Terminal, Straight Lever Actuator, Panel Mount,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.70.00 | |
| Actuator Length | 0.19 inch | |
| Actuator Travel | 5.588 mm | |
| Actuator Type | STRAIGHT LEVER | |
| Body Breadth | 6.35 mm | |
| Body Height | 9.0424 mm | |
| Body Length or Diameter | 19.8374 mm | |
| Contact (AC) Max Rating R Load | 5A@250VAC | |
| Contact Current(AC)-Max | 5 A | |
| Contact Timing | SNAP ACTION | |
| Contact Voltage(AC)-Max | 250 V | |
| Mounting Feature | PANEL MOUNT | |
| Operating Force-Max | 1.9599 N | |
| Operating Position | 0.35 inch | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPDT | |
| Switch Type | SNAP ACTING/LIMIT SWITCH | |
| Terminal Length | 0.186 inch | |
| Termination Type | SCREW |
111SM1-T2 Frequently Asked Questions (FAQ)
-
The recommended mounting orientation is with the sensor axis vertical and the connector facing downwards to prevent moisture ingress.
-
The 111SM1-T2 is factory-calibrated and does not require additional calibration. However, it's recommended to perform a system-level calibration to ensure optimal performance.
-
The 111SM1-T2 can withstand vibrations up to 10g (rms) from 10 Hz to 2 kHz, but it's recommended to consult the datasheet for specific vibration testing and validation.
-
The 111SM1-T2 is rated for operation up to 125°C (257°F), but it's recommended to derate the sensor's performance and consult the datasheet for temperature-related specifications.
-
The 111SM1-T2 has a 3-pin connector with analog output. You can connect it to a microcontroller or PLC using an analog-to-digital converter (ADC) or a dedicated analog input module.